PBS2H21ASH/Mikanum
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Hallo

Browse Source
This commit is contained in:
Malte Schulze Hobeling 2023-01-19 08:45:51 +01:00
commit d9714a88f1
30 changed files with 4343 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

198
IRremote/IRremote.cpp Normal file
View File

@ -0,0 +1,198 @@
//******************************************************************************
// IRremote
// Version 2.0.1 June, 2015
// Copyright 2009 Ken Shirriff
// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
//
// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
// Modified by Mitra Ardron <mitra@mitra.biz>
// Added Sanyo and Mitsubishi controllers
// Modified Sony to spot the repeat codes that some Sony's send
//
// Interrupt code based on NECIRrcv by Joe Knapp
// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
//
// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
// LG added by Darryl Smith (based on the JVC protocol)
// Whynter A/C ARC-110WD added by Francesco Meschia
//******************************************************************************
// Defining IR_GLOBAL here allows us to declare the instantiation of global variables
#define IR_GLOBAL
# include "IRremote.h"
# include "IRremoteInt.h"
#undef IR_GLOBAL
#ifdef HAS_AVR_INTERRUPT_H
#include <avr/interrupt.h>
#endif
//+=============================================================================
// The match functions were (apparently) originally MACROs to improve code speed
// (although this would have bloated the code) hence the names being CAPS
// A later release implemented debug output and so they needed to be converted
// to functions.
// I tried to implement a dual-compile mode (DEBUG/non-DEBUG) but for some
// reason, no matter what I did I could not get them to function as macros again.
// I have found a *lot* of bugs in the Arduino compiler over the last few weeks,
// and I am currently assuming that one of these bugs is my problem.
// I may revisit this code at a later date and look at the assembler produced
// in a hope of finding out what is going on, but for now they will remain as
// functions even in non-DEBUG mode
//
int MATCH (int measured, int desired)
{
DBG_PRINT(F("Testing: "));
DBG_PRINT(TICKS_LOW(desired), DEC);
DBG_PRINT(F(" <= "));
DBG_PRINT(measured, DEC);
DBG_PRINT(F(" <= "));
DBG_PRINT(TICKS_HIGH(desired), DEC);
bool passed = ((measured >= TICKS_LOW(desired)) && (measured <= TICKS_HIGH(desired)));
if (passed)
DBG_PRINTLN(F("?; passed"));
else
DBG_PRINTLN(F("?; FAILED"));
return passed;
}
//+========================================================
// Due to sensor lag, when received, Marks tend to be 100us too long
//
int MATCH_MARK (int measured_ticks, int desired_us)
{
DBG_PRINT(F("Testing mark (actual vs desired): "));
DBG_PRINT(measured_ticks * USECPERTICK, DEC);
DBG_PRINT(F("us vs "));
DBG_PRINT(desired_us, DEC);
DBG_PRINT("us");
DBG_PRINT(": ");
DBG_PRINT(TICKS_LOW(desired_us + MARK_EXCESS) * USECPERTICK, DEC);
DBG_PRINT(F(" <= "));
DBG_PRINT(measured_ticks * USECPERTICK, DEC);
DBG_PRINT(F(" <= "));
DBG_PRINT(TICKS_HIGH(desired_us + MARK_EXCESS) * USECPERTICK, DEC);
bool passed = ((measured_ticks >= TICKS_LOW (desired_us + MARK_EXCESS))
&& (measured_ticks <= TICKS_HIGH(desired_us + MARK_EXCESS)));
if (passed)
DBG_PRINTLN(F("?; passed"));
else
DBG_PRINTLN(F("?; FAILED"));
return passed;
}
//+========================================================
// Due to sensor lag, when received, Spaces tend to be 100us too short
//
int MATCH_SPACE (int measured_ticks, int desired_us)
{
DBG_PRINT(F("Testing space (actual vs desired): "));
DBG_PRINT(measured_ticks * USECPERTICK, DEC);
DBG_PRINT(F("us vs "));
DBG_PRINT(desired_us, DEC);
DBG_PRINT("us");
DBG_PRINT(": ");
DBG_PRINT(TICKS_LOW(desired_us - MARK_EXCESS) * USECPERTICK, DEC);
DBG_PRINT(F(" <= "));
DBG_PRINT(measured_ticks * USECPERTICK, DEC);
DBG_PRINT(F(" <= "));
DBG_PRINT(TICKS_HIGH(desired_us - MARK_EXCESS) * USECPERTICK, DEC);
bool passed = ((measured_ticks >= TICKS_LOW (desired_us - MARK_EXCESS))
&& (measured_ticks <= TICKS_HIGH(desired_us - MARK_EXCESS)));
if (passed)
DBG_PRINTLN(F("?; passed"));
else
DBG_PRINTLN(F("?; FAILED"));
return passed;
}
//+=============================================================================
// Interrupt Service Routine - Fires every 50uS
// TIMER2 interrupt code to collect raw data.
// Widths of alternating SPACE, MARK are recorded in rawbuf.
// Recorded in ticks of 50uS [microseconds, 0.000050 seconds]
// 'rawlen' counts the number of entries recorded so far.
// First entry is the SPACE between transmissions.
// As soon as a the first [SPACE] entry gets long:
// Ready is set; State switches to IDLE; Timing of SPACE continues.
// As soon as first MARK arrives:
// Gap width is recorded; Ready is cleared; New logging starts
//
ISR (TIMER_INTR_NAME)
{
TIMER_RESET;
// Read if IR Receiver -> SPACE [xmt LED off] or a MARK [xmt LED on]
// digitalRead() is very slow. Optimisation is possible, but makes the code unportable
uint8_t irdata = (uint8_t)digitalRead(irparams.recvpin);
irparams.timer++; // One more 50uS tick
if (irparams.rawlen >= RAWBUF) irparams.rcvstate = STATE_OVERFLOW ; // Buffer overflow
switch(irparams.rcvstate) {
//......................................................................
case STATE_IDLE: // In the middle of a gap
if (irdata == MARK) {
if (irparams.timer < GAP_TICKS) { // Not big enough to be a gap.
irparams.timer = 0;
} else {
// Gap just ended; Record duration; Start recording transmission
irparams.overflow = false;
irparams.rawlen = 0;
irparams.rawbuf[irparams.rawlen++] = irparams.timer;
irparams.timer = 0;
irparams.rcvstate = STATE_MARK;
}
}
break;
//......................................................................
case STATE_MARK: // Timing Mark
if (irdata == SPACE) { // Mark ended; Record time
irparams.rawbuf[irparams.rawlen++] = irparams.timer;
irparams.timer = 0;
irparams.rcvstate = STATE_SPACE;
}
break;
//......................................................................
case STATE_SPACE: // Timing Space
if (irdata == MARK) { // Space just ended; Record time
irparams.rawbuf[irparams.rawlen++] = irparams.timer;
irparams.timer = 0;
irparams.rcvstate = STATE_MARK;
} else if (irparams.timer > GAP_TICKS) { // Space
// A long Space, indicates gap between codes
// Flag the current code as ready for processing
// Switch to STOP
// Don't reset timer; keep counting Space width
irparams.rcvstate = STATE_STOP;
}
break;
//......................................................................
case STATE_STOP: // Waiting; Measuring Gap
if (irdata == MARK) irparams.timer = 0 ; // Reset gap timer
break;
//......................................................................
case STATE_OVERFLOW: // Flag up a read overflow; Stop the State Machine
irparams.overflow = true;
irparams.rcvstate = STATE_STOP;
break;
}
#ifdef BLINKLED
// If requested, flash LED while receiving IR data
if (irparams.blinkflag) {
if (irdata == MARK)
if (irparams.blinkpin) digitalWrite(irparams.blinkpin, HIGH); // Turn user defined pin LED on
else BLINKLED_ON() ; // if no user defined LED pin, turn default LED pin for the hardware on
else if (irparams.blinkpin) digitalWrite(irparams.blinkpin, LOW); // Turn user defined pin LED on
else BLINKLED_OFF() ; // if no user defined LED pin, turn default LED pin for the hardware on
}
#endif // BLINKLED
}

371
IRremote/IRremote.h Normal file
View File

@ -0,0 +1,371 @@
//******************************************************************************
// IRremote
// Version 2.0.1 June, 2015
// Copyright 2009 Ken Shirriff
// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
// Edited by Mitra to add new controller SANYO
//
// Interrupt code based on NECIRrcv by Joe Knapp
// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
//
// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
// LG added by Darryl Smith (based on the JVC protocol)
// Whynter A/C ARC-110WD added by Francesco Meschia
//******************************************************************************
#ifndef IRremote_h
#define IRremote_h
#define VERSION_IRREMOTE "2.4.0"
//------------------------------------------------------------------------------
// The ISR header contains several useful macros the user may wish to use
//
#include "IRremoteInt.h"
//------------------------------------------------------------------------------
// Supported IR protocols
// Each protocol you include costs memory and, during decode, costs time
// Disable (set to 0) all the protocols you do not need/want!
//
#define DECODE_RC5 1
#define SEND_RC5 1
#define DECODE_RC6 1
#define SEND_RC6 1
#define DECODE_NEC 1
#define SEND_NEC 1
#define DECODE_SONY 1
#define SEND_SONY 1
#define DECODE_PANASONIC 1
#define SEND_PANASONIC 1
#define DECODE_JVC 1
#define SEND_JVC 1
#define DECODE_SAMSUNG 1
#define SEND_SAMSUNG 1
#define DECODE_WHYNTER 1
#define SEND_WHYNTER 1
#define DECODE_AIWA_RC_T501 1
#define SEND_AIWA_RC_T501 1
#define DECODE_LG 1
#define SEND_LG 1
#define DECODE_SANYO 1
#define SEND_SANYO 0 // NOT WRITTEN
#define DECODE_MITSUBISHI 1
#define SEND_MITSUBISHI 0 // NOT WRITTEN
#define DECODE_DISH 0 // NOT WRITTEN
#define SEND_DISH 1
#define DECODE_SHARP 0 // NOT WRITTEN
#define SEND_SHARP 1
#define DECODE_DENON 1
#define SEND_DENON 1
#define DECODE_PRONTO 0 // This function doe not logically make sense
#define SEND_PRONTO 1
#define DECODE_LEGO_PF 0 // NOT WRITTEN
#define SEND_LEGO_PF 1
//------------------------------------------------------------------------------
// When sending a Pronto code we request to send either the "once" code
// or the "repeat" code
// If the code requested does not exist we can request to fallback on the
// other code (the one we did not explicitly request)
//
// I would suggest that "fallback" will be the standard calling method
// The last paragraph on this page discusses the rationale of this idea:
// http://www.remotecentral.com/features/irdisp2.htm
//
#define PRONTO_ONCE false
#define PRONTO_REPEAT true
#define PRONTO_FALLBACK true
#define PRONTO_NOFALLBACK false
//------------------------------------------------------------------------------
// An enumerated list of all supported formats
// You do NOT need to remove entries from this list when disabling protocols!
//
typedef
enum {
UNKNOWN = -1,
UNUSED = 0,
RC5,
RC6,
NEC,
SONY,
PANASONIC,
JVC,
SAMSUNG,
WHYNTER,
AIWA_RC_T501,
LG,
SANYO,
MITSUBISHI,
DISH,
SHARP,
DENON,
PRONTO,
LEGO_PF,
}
decode_type_t;
//------------------------------------------------------------------------------
// Set DEBUG to 1 for lots of lovely debug output
//
#define DEBUG 0
//------------------------------------------------------------------------------
// Debug directives
//
#if DEBUG
# define DBG_PRINT(...) Serial.print(__VA_ARGS__)
# define DBG_PRINTLN(...) Serial.println(__VA_ARGS__)
#else
# define DBG_PRINT(...)
# define DBG_PRINTLN(...)
#endif
//------------------------------------------------------------------------------
// Mark & Space matching functions
//
int MATCH (int measured, int desired) ;
int MATCH_MARK (int measured_ticks, int desired_us) ;
int MATCH_SPACE (int measured_ticks, int desired_us) ;
//------------------------------------------------------------------------------
// Results returned from the decoder
//
class decode_results
{
public:
decode_type_t decode_type; // UNKNOWN, NEC, SONY, RC5, ...
unsigned int address; // Used by Panasonic & Sharp [16-bits]
unsigned long value; // Decoded value [max 32-bits]
int bits; // Number of bits in decoded value
volatile unsigned int *rawbuf; // Raw intervals in 50uS ticks
int rawlen; // Number of records in rawbuf
int overflow; // true iff IR raw code too long
};
//------------------------------------------------------------------------------
// Decoded value for NEC when a repeat code is received
//
#define REPEAT 0xFFFFFFFF
//------------------------------------------------------------------------------
// Main class for receiving IR
//
class IRrecv
{
public:
IRrecv (int recvpin) ;
IRrecv (int recvpin, int blinkpin);
void blink13 (int blinkflag) ;
int decode (decode_results *results) ;
void enableIRIn ( ) ;
bool isIdle ( ) ;
void resume ( ) ;
private:
long decodeHash (decode_results *results) ;
int compare (unsigned int oldval, unsigned int newval) ;
//......................................................................
# if (DECODE_RC5 || DECODE_RC6)
// This helper function is shared by RC5 and RC6
int getRClevel (decode_results *results, int *offset, int *used, int t1) ;
# endif
# if DECODE_RC5
bool decodeRC5 (decode_results *results) ;
# endif
# if DECODE_RC6
bool decodeRC6 (decode_results *results) ;
# endif
//......................................................................
# if DECODE_NEC
bool decodeNEC (decode_results *results) ;
# endif
//......................................................................
# if DECODE_SONY
bool decodeSony (decode_results *results) ;
# endif
//......................................................................
# if DECODE_PANASONIC
bool decodePanasonic (decode_results *results) ;
# endif
//......................................................................
# if DECODE_JVC
bool decodeJVC (decode_results *results) ;
# endif
//......................................................................
# if DECODE_SAMSUNG
bool decodeSAMSUNG (decode_results *results) ;
# endif
//......................................................................
# if DECODE_WHYNTER
bool decodeWhynter (decode_results *results) ;
# endif
//......................................................................
# if DECODE_AIWA_RC_T501
bool decodeAiwaRCT501 (decode_results *results) ;
# endif
//......................................................................
# if DECODE_LG
bool decodeLG (decode_results *results) ;
# endif
//......................................................................
# if DECODE_SANYO
bool decodeSanyo (decode_results *results) ;
# endif
//......................................................................
# if DECODE_MITSUBISHI
bool decodeMitsubishi (decode_results *results) ;
# endif
//......................................................................
# if DECODE_DISH
bool decodeDish (decode_results *results) ; // NOT WRITTEN
# endif
//......................................................................
# if DECODE_SHARP
bool decodeSharp (decode_results *results) ; // NOT WRITTEN
# endif
//......................................................................
# if DECODE_DENON
bool decodeDenon (decode_results *results) ;
# endif
//......................................................................
# if DECODE_LEGO_PF
bool decodeLegoPowerFunctions (decode_results *results) ;
# endif
} ;
//------------------------------------------------------------------------------
// Main class for sending IR
//
class IRsend
{
public:
#ifdef USE_SOFT_CARRIER
IRsend(int pin = SEND_PIN)
{
sendPin = pin;
}
#else
IRsend()
{
}
#endif
void custom_delay_usec (unsigned long uSecs);
void enableIROut (int khz) ;
void mark (unsigned int usec) ;
void space (unsigned int usec) ;
void sendRaw (const unsigned int buf[], unsigned int len, unsigned int hz) ;
//......................................................................
# if SEND_RC5
void sendRC5 (unsigned long data, int nbits) ;
# endif
# if SEND_RC6
void sendRC6 (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_NEC
void sendNEC (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_SONY
void sendSony (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_PANASONIC
void sendPanasonic (unsigned int address, unsigned long data) ;
# endif
//......................................................................
# if SEND_JVC
// JVC does NOT repeat by sending a separate code (like NEC does).
// The JVC protocol repeats by skipping the header.
// To send a JVC repeat signal, send the original code value
// and set 'repeat' to true
void sendJVC (unsigned long data, int nbits, bool repeat) ;
# endif
//......................................................................
# if SEND_SAMSUNG
void sendSAMSUNG (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_WHYNTER
void sendWhynter (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_AIWA_RC_T501
void sendAiwaRCT501 (int code) ;
# endif
//......................................................................
# if SEND_LG
void sendLG (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_SANYO
void sendSanyo ( ) ; // NOT WRITTEN
# endif
//......................................................................
# if SEND_MISUBISHI
void sendMitsubishi ( ) ; // NOT WRITTEN
# endif
//......................................................................
# if SEND_DISH
void sendDISH (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_SHARP
void sendSharpRaw (unsigned long data, int nbits) ;
void sendSharp (unsigned int address, unsigned int command) ;
# endif
//......................................................................
# if SEND_DENON
void sendDenon (unsigned long data, int nbits) ;
# endif
//......................................................................
# if SEND_PRONTO
void sendPronto (char* code, bool repeat, bool fallback) ;
# endif
//......................................................................
# if SEND_LEGO_PF
void sendLegoPowerFunctions (uint16_t data, bool repeat = true) ;
# endif
#ifdef USE_SOFT_CARRIER
private:
int sendPin;
unsigned int periodTime;
unsigned int periodOnTime;
void sleepMicros(unsigned long us);
void sleepUntilMicros(unsigned long targetTime);
#else
const int sendPin = SEND_PIN;
#endif
} ;
#endif

113
IRremote/IRremoteInt.h Normal file
View File

@ -0,0 +1,113 @@
//******************************************************************************
// IRremote
// Version 2.0.1 June, 2015
// Copyright 2009 Ken Shirriff
// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
//
// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
//
// Interrupt code based on NECIRrcv by Joe Knapp
// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
//
// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
// Whynter A/C ARC-110WD added by Francesco Meschia
//******************************************************************************
#ifndef IRremoteint_h
#define IRremoteint_h
//------------------------------------------------------------------------------
// Include the right Arduino header
//
#if defined(ARDUINO) && (ARDUINO >= 100)
# include <Arduino.h>
#else
# if !defined(IRPRONTO)
# include <WProgram.h>
# endif
#endif
//------------------------------------------------------------------------------
// This handles definition and access to global variables
//
#ifdef IR_GLOBAL
# define EXTERN
#else
# define EXTERN extern
#endif
//------------------------------------------------------------------------------
// Information for the Interrupt Service Routine
//
#define RAWBUF 101 // Maximum length of raw duration buffer
typedef
struct {
// The fields are ordered to reduce memory over caused by struct-padding
uint8_t rcvstate; // State Machine state
uint8_t recvpin; // Pin connected to IR data from detector
uint8_t blinkpin;
uint8_t blinkflag; // true -> enable blinking of pin on IR processing
uint8_t rawlen; // counter of entries in rawbuf
unsigned int timer; // State timer, counts 50uS ticks.
unsigned int rawbuf[RAWBUF]; // raw data
uint8_t overflow; // Raw buffer overflow occurred
}
irparams_t;
// ISR State-Machine : Receiver States
#define STATE_IDLE 2
#define STATE_MARK 3
#define STATE_SPACE 4
#define STATE_STOP 5
#define STATE_OVERFLOW 6
// Allow all parts of the code access to the ISR data
// NB. The data can be changed by the ISR at any time, even mid-function
// Therefore we declare it as "volatile" to stop the compiler/CPU caching it
EXTERN volatile irparams_t irparams;
//------------------------------------------------------------------------------
// Defines for setting and clearing register bits
//
#ifndef cbi
# define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
# define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
//------------------------------------------------------------------------------
// Pulse parms are ((X*50)-100) for the Mark and ((X*50)+100) for the Space.
// First MARK is the one after the long gap
// Pulse parameters in uSec
//
// Due to sensor lag, when received, Marks tend to be 100us too long and
// Spaces tend to be 100us too short
#define MARK_EXCESS 100
// Upper and Lower percentage tolerances in measurements
#define TOLERANCE 25
#define LTOL (1.0 - (TOLERANCE/100.))
#define UTOL (1.0 + (TOLERANCE/100.))
// Minimum gap between IR transmissions
#define _GAP 5000
#define GAP_TICKS (_GAP/USECPERTICK)
#define TICKS_LOW(us) ((int)(((us)*LTOL/USECPERTICK)))
#define TICKS_HIGH(us) ((int)(((us)*UTOL/USECPERTICK + 1)))
//------------------------------------------------------------------------------
// IR detector output is active low
//
#define MARK 0
#define SPACE 1
// All board specific stuff has been moved to its own file, included here.
#include "boarddefs.h"
#endif

653
IRremote/boarddefs.h Normal file
View File

@ -0,0 +1,653 @@
//******************************************************************************
// IRremote
// Version 2.0.1 June, 2015
// Copyright 2009 Ken Shirriff
// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
// This file contains all board specific information. It was previously contained within
// IRremoteInt.h
// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
//
// Interrupt code based on NECIRrcv by Joe Knapp
// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
//
// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
// Whynter A/C ARC-110WD added by Francesco Meschia
//******************************************************************************
#ifndef boarddefs_h
#define boarddefs_h
// Define some defaults, that some boards may like to override
// (This is to avoid negative logic, ! DONT_... is just awkward.)
// This board has/needs the avr/interrupt.h
#define HAS_AVR_INTERRUPT_H
// Define if sending is supported
#define SENDING_SUPPORTED
// If defined, a standard enableIRIn function will be define.
// Undefine for boards supplying their own.
#define USE_DEFAULT_ENABLE_IR_IN
// Duty cycle in percent for sent signals. Presently takes effect only with USE_SOFT_CARRIER
#define DUTY_CYCLE 50
// If USE_SOFT_CARRIER, this amount (in micro seconds) is subtracted from the
// on-time of the pulses.
#define PULSE_CORRECTION 3
// digitalWrite is supposed to be slow. If this is an issue, define faster,
// board-dependent versions of these macros SENDPIN_ON(pin) and SENDPIN_OFF(pin).
// Portable, possibly slow, default definitions are given at the end of this file.
// If defining new versions, feel free to ignore the pin argument if it
// is not configurable on the current board.
//------------------------------------------------------------------------------
// Defines for blinking the LED
//
#if defined(CORE_LED0_PIN)
# define BLINKLED CORE_LED0_PIN
# define BLINKLED_ON() (digitalWrite(CORE_LED0_PIN, HIGH))
# define BLINKLED_OFF() (digitalWrite(CORE_LED0_PIN, LOW))
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
# define BLINKLED 13
# define BLINKLED_ON() (PORTB |= B10000000)
# define BLINKLED_OFF() (PORTB &= B01111111)
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
# define BLINKLED 0
# define BLINKLED_ON() (PORTD |= B00000001)
# define BLINKLED_OFF() (PORTD &= B11111110)
#elif defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
# define BLINKLED LED_BUILTIN
# define BLINKLED_ON() (digitalWrite(LED_BUILTIN, HIGH))
# define BLINKLED_OFF() (digitalWrite(LED_BUILTIN, LOW))
# define USE_SOFT_CARRIER
// Define to use spin wait instead of delayMicros()
//# define USE_SPIN_WAIT
# undef USE_DEFAULT_ENABLE_IR_IN
// The default pin used used for sending.
# define SEND_PIN 9
#elif defined(ESP32)
// No system LED on ESP32, disable blinking by NOT defining BLINKLED
// avr/interrupt.h is not present
# undef HAS_AVR_INTERRUPT_H
// Sending not implemented
# undef SENDING_SUPPORTED#
// Supply own enbleIRIn
# undef USE_DEFAULT_ENABLE_IR_IN
#else
# define BLINKLED 13
# define BLINKLED_ON() (PORTB |= B00100000)
# define BLINKLED_OFF() (PORTB &= B11011111)
#endif
//------------------------------------------------------------------------------
// CPU Frequency
//
#ifdef F_CPU
# define SYSCLOCK F_CPU // main Arduino clock
#else
# define SYSCLOCK 16000000 // main Arduino clock
#endif
// microseconds per clock interrupt tick
#define USECPERTICK 50
//------------------------------------------------------------------------------
// Define which timer to use
//
// Uncomment the timer you wish to use on your board.
// If you are using another library which uses timer2, you have options to
// switch IRremote to use a different timer.
//
// Arduino Mega
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
//#define IR_USE_TIMER1 // tx = pin 11
#define IR_USE_TIMER2 // tx = pin 9
//#define IR_USE_TIMER3 // tx = pin 5
//#define IR_USE_TIMER4 // tx = pin 6
//#define IR_USE_TIMER5 // tx = pin 46
// Teensy 1.0
#elif defined(__AVR_AT90USB162__)
#define IR_USE_TIMER1 // tx = pin 17
// Teensy 2.0
#elif defined(__AVR_ATmega32U4__)
//#define IR_USE_TIMER1 // tx = pin 14
//#define IR_USE_TIMER3 // tx = pin 9
#define IR_USE_TIMER4_HS // tx = pin 10
// Teensy 3.0 / Teensy 3.1
#elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define IR_USE_TIMER_CMT // tx = pin 5
// Teensy-LC
#elif defined(__MKL26Z64__)
#define IR_USE_TIMER_TPM1 // tx = pin 16
// Teensy++ 1.0 & 2.0
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
//#define IR_USE_TIMER1 // tx = pin 25
#define IR_USE_TIMER2 // tx = pin 1
//#define IR_USE_TIMER3 // tx = pin 16
// MightyCore - ATmega1284
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
//#define IR_USE_TIMER1 // tx = pin 13
#define IR_USE_TIMER2 // tx = pin 14
//#define IR_USE_TIMER3 // tx = pin 6
// MightyCore - ATmega164, ATmega324, ATmega644
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|| defined(__AVR_ATmega164P__)
//#define IR_USE_TIMER1 // tx = pin 13
#define IR_USE_TIMER2 // tx = pin 14
//MegaCore - ATmega64, ATmega128
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
#define IR_USE_TIMER1 // tx = pin 13
// MightyCore - ATmega8535, ATmega16, ATmega32
#elif defined(__AVR_ATmega8535__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__)
#define IR_USE_TIMER1 // tx = pin 13
// Atmega8
#elif defined(__AVR_ATmega8__)
#define IR_USE_TIMER1 // tx = pin 9
// ATtiny84
#elif defined(__AVR_ATtiny84__)
#define IR_USE_TIMER1 // tx = pin 6
//ATtiny85
#elif defined(__AVR_ATtiny85__)
#define IR_USE_TIMER_TINY0 // tx = pin 1
#elif defined(ESP32)
#define IR_TIMER_USE_ESP32
#elif defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
#define TIMER_PRESCALER_DIV 64
#else
// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
// ATmega48, ATmega88, ATmega168, ATmega328
//#define IR_USE_TIMER1 // tx = pin 9
#define IR_USE_TIMER2 // tx = pin 3
#endif
//------------------------------------------------------------------------------
// Defines for Timer
//---------------------------------------------------------
// Timer2 (8 bits)
//
#if defined(IR_USE_TIMER2)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR2A |= _BV(COM2B1))
#define TIMER_DISABLE_PWM (TCCR2A &= ~(_BV(COM2B1)))
#define TIMER_ENABLE_INTR (TIMSK2 = _BV(OCIE2A))
#define TIMER_DISABLE_INTR (TIMSK2 = 0)
#define TIMER_INTR_NAME TIMER2_COMPA_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR2A = _BV(WGM20); \
TCCR2B = _BV(WGM22) | _BV(CS20); \
OCR2A = pwmval; \
OCR2B = pwmval / 3; \
})
#define TIMER_COUNT_TOP (SYSCLOCK * USECPERTICK / 1000000)
//-----------------
#if (TIMER_COUNT_TOP < 256)
# define TIMER_CONFIG_NORMAL() ({ \
TCCR2A = _BV(WGM21); \
TCCR2B = _BV(CS20); \
OCR2A = TIMER_COUNT_TOP; \
TCNT2 = 0; \
})
#else
# define TIMER_CONFIG_NORMAL() ({ \
TCCR2A = _BV(WGM21); \
TCCR2B = _BV(CS21); \
OCR2A = TIMER_COUNT_TOP / 8; \
TCNT2 = 0; \
})
#endif
//-----------------
#if defined(CORE_OC2B_PIN)
# define SEND_PIN CORE_OC2B_PIN // Teensy
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
# define SEND_PIN 9 // Arduino Mega
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|| defined(__AVR_ATmega164P__)
# define SEND_PIN 14 // MightyCore
#else
# define SEND_PIN 3 // Arduino Duemilanove, Diecimila, LilyPad, etc
#endif // ATmega48, ATmega88, ATmega168, ATmega328
//---------------------------------------------------------
// Timer1 (16 bits)
//
#elif defined(IR_USE_TIMER1)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR1A |= _BV(COM1A1))
#define TIMER_DISABLE_PWM (TCCR1A &= ~(_BV(COM1A1)))
//-----------------
#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega8535__) \
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
# define TIMER_ENABLE_INTR (TIMSK |= _BV(OCIE1A))
# define TIMER_DISABLE_INTR (TIMSK &= ~_BV(OCIE1A))
#else
# define TIMER_ENABLE_INTR (TIMSK1 = _BV(OCIE1A))
# define TIMER_DISABLE_INTR (TIMSK1 = 0)
#endif
//-----------------
#define TIMER_INTR_NAME TIMER1_COMPA_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR1A = _BV(WGM11); \
TCCR1B = _BV(WGM13) | _BV(CS10); \
ICR1 = pwmval; \
OCR1A = pwmval / 3; \
})
#define TIMER_CONFIG_NORMAL() ({ \
TCCR1A = 0; \
TCCR1B = _BV(WGM12) | _BV(CS10); \
OCR1A = SYSCLOCK * USECPERTICK / 1000000; \
TCNT1 = 0; \
})
//-----------------
#if defined(CORE_OC1A_PIN)
# define SEND_PIN CORE_OC1A_PIN // Teensy
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
# define SEND_PIN 11 // Arduino Mega
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
# define SEND_PIN 13 // MegaCore
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__)
# define SEND_PIN 13 // MightyCore
#elif defined(__AVR_ATtiny84__)
# define SEND_PIN 6
#else
# define SEND_PIN 9 // Arduino Duemilanove, Diecimila, LilyPad, etc
#endif // ATmega48, ATmega88, ATmega168, ATmega328
//---------------------------------------------------------
// Timer3 (16 bits)
//
#elif defined(IR_USE_TIMER3)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR3A |= _BV(COM3A1))
#define TIMER_DISABLE_PWM (TCCR3A &= ~(_BV(COM3A1)))
#define TIMER_ENABLE_INTR (TIMSK3 = _BV(OCIE3A))
#define TIMER_DISABLE_INTR (TIMSK3 = 0)
#define TIMER_INTR_NAME TIMER3_COMPA_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR3A = _BV(WGM31); \
TCCR3B = _BV(WGM33) | _BV(CS30); \
ICR3 = pwmval; \
OCR3A = pwmval / 3; \
})
#define TIMER_CONFIG_NORMAL() ({ \
TCCR3A = 0; \
TCCR3B = _BV(WGM32) | _BV(CS30); \
OCR3A = SYSCLOCK * USECPERTICK / 1000000; \
TCNT3 = 0; \
})
//-----------------
#if defined(CORE_OC3A_PIN)
# define SEND_PIN CORE_OC3A_PIN // Teensy
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
# define SEND_PIN 5 // Arduino Mega
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
# define SEND_PIN 6 // MightyCore
#else
# error "Please add OC3A pin number here\n"
#endif
//---------------------------------------------------------
// Timer4 (10 bits, high speed option)
//
#elif defined(IR_USE_TIMER4_HS)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR4A |= _BV(COM4A1))
#define TIMER_DISABLE_PWM (TCCR4A &= ~(_BV(COM4A1)))
#define TIMER_ENABLE_INTR (TIMSK4 = _BV(TOIE4))
#define TIMER_DISABLE_INTR (TIMSK4 = 0)
#define TIMER_INTR_NAME TIMER4_OVF_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR4A = (1<<PWM4A); \
TCCR4B = _BV(CS40); \
TCCR4C = 0; \
TCCR4D = (1<<WGM40); \
TCCR4E = 0; \
TC4H = pwmval >> 8; \
OCR4C = pwmval; \
TC4H = (pwmval / 3) >> 8; \
OCR4A = (pwmval / 3) & 255; \
})
#define TIMER_CONFIG_NORMAL() ({ \
TCCR4A = 0; \
TCCR4B = _BV(CS40); \
TCCR4C = 0; \
TCCR4D = 0; \
TCCR4E = 0; \
TC4H = (SYSCLOCK * USECPERTICK / 1000000) >> 8; \
OCR4C = (SYSCLOCK * USECPERTICK / 1000000) & 255; \
TC4H = 0; \
TCNT4 = 0; \
})
//-----------------
#if defined(CORE_OC4A_PIN)
# define SEND_PIN CORE_OC4A_PIN // Teensy
#elif defined(__AVR_ATmega32U4__)
# define SEND_PIN 13 // Leonardo
#else
# error "Please add OC4A pin number here\n"
#endif
//---------------------------------------------------------
// Timer4 (16 bits)
//
#elif defined(IR_USE_TIMER4)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR4A |= _BV(COM4A1))
#define TIMER_DISABLE_PWM (TCCR4A &= ~(_BV(COM4A1)))
#define TIMER_ENABLE_INTR (TIMSK4 = _BV(OCIE4A))
#define TIMER_DISABLE_INTR (TIMSK4 = 0)
#define TIMER_INTR_NAME TIMER4_COMPA_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR4A = _BV(WGM41); \
TCCR4B = _BV(WGM43) | _BV(CS40); \
ICR4 = pwmval; \
OCR4A = pwmval / 3; \
})
#define TIMER_CONFIG_NORMAL() ({ \
TCCR4A = 0; \
TCCR4B = _BV(WGM42) | _BV(CS40); \
OCR4A = SYSCLOCK * USECPERTICK / 1000000; \
TCNT4 = 0; \
})
//-----------------
#if defined(CORE_OC4A_PIN)
# define SEND_PIN CORE_OC4A_PIN
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
# define SEND_PIN 6 // Arduino Mega
#else
# error "Please add OC4A pin number here\n"
#endif
//---------------------------------------------------------
// Timer5 (16 bits)
//
#elif defined(IR_USE_TIMER5)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR5A |= _BV(COM5A1))
#define TIMER_DISABLE_PWM (TCCR5A &= ~(_BV(COM5A1)))
#define TIMER_ENABLE_INTR (TIMSK5 = _BV(OCIE5A))
#define TIMER_DISABLE_INTR (TIMSK5 = 0)
#define TIMER_INTR_NAME TIMER5_COMPA_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR5A = _BV(WGM51); \
TCCR5B = _BV(WGM53) | _BV(CS50); \
ICR5 = pwmval; \
OCR5A = pwmval / 3; \
})
#define TIMER_CONFIG_NORMAL() ({ \
TCCR5A = 0; \
TCCR5B = _BV(WGM52) | _BV(CS50); \
OCR5A = SYSCLOCK * USECPERTICK / 1000000; \
TCNT5 = 0; \
})
//-----------------
#if defined(CORE_OC5A_PIN)
# define SEND_PIN CORE_OC5A_PIN
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
# define SEND_PIN 46 // Arduino Mega
#else
# error "Please add OC5A pin number here\n"
#endif
//---------------------------------------------------------
// Special carrier modulator timer
//
#elif defined(IR_USE_TIMER_CMT)
#define TIMER_RESET ({ \
uint8_t tmp __attribute__((unused)) = CMT_MSC; \
CMT_CMD2 = 30; \
})
#define TIMER_ENABLE_PWM do { \
CORE_PIN5_CONFIG = PORT_PCR_MUX(2) | PORT_PCR_DSE | PORT_PCR_SRE; \
} while(0)
#define TIMER_DISABLE_PWM do { \
CORE_PIN5_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_DSE | PORT_PCR_SRE; \
} while(0)
#define TIMER_ENABLE_INTR NVIC_ENABLE_IRQ(IRQ_CMT)
#define TIMER_DISABLE_INTR NVIC_DISABLE_IRQ(IRQ_CMT)
#define TIMER_INTR_NAME cmt_isr
//-----------------
#ifdef ISR
# undef ISR
#endif
#define ISR(f) void f(void)
//-----------------
#define CMT_PPS_DIV ((F_BUS + 7999999) / 8000000)
#if F_BUS < 8000000
#error IRremote requires at least 8 MHz on Teensy 3.x
#endif
//-----------------
#define TIMER_CONFIG_KHZ(val) ({ \
SIM_SCGC4 |= SIM_SCGC4_CMT; \
SIM_SOPT2 |= SIM_SOPT2_PTD7PAD; \
CMT_PPS = CMT_PPS_DIV - 1; \
CMT_CGH1 = ((F_BUS / CMT_PPS_DIV / 3000) + ((val)/2)) / (val); \
CMT_CGL1 = ((F_BUS / CMT_PPS_DIV / 1500) + ((val)/2)) / (val); \
CMT_CMD1 = 0; \
CMT_CMD2 = 30; \
CMT_CMD3 = 0; \
CMT_CMD4 = 0; \
CMT_OC = 0x60; \
CMT_MSC = 0x01; \
})
#define TIMER_CONFIG_NORMAL() ({ \
SIM_SCGC4 |= SIM_SCGC4_CMT; \
CMT_PPS = CMT_PPS_DIV - 1; \
CMT_CGH1 = 1; \
CMT_CGL1 = 1; \
CMT_CMD1 = 0; \
CMT_CMD2 = 30; \
CMT_CMD3 = 0; \
CMT_CMD4 = (F_BUS / 160000 + CMT_PPS_DIV / 2) / CMT_PPS_DIV - 31; \
CMT_OC = 0; \
CMT_MSC = 0x03; \
})
#define SEND_PIN 5
// defines for TPM1 timer on Teensy-LC
#elif defined(IR_USE_TIMER_TPM1)
#define TIMER_RESET FTM1_SC |= FTM_SC_TOF;
#define TIMER_ENABLE_PWM CORE_PIN16_CONFIG = PORT_PCR_MUX(3)|PORT_PCR_DSE|PORT_PCR_SRE
#define TIMER_DISABLE_PWM CORE_PIN16_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_SRE
#define TIMER_ENABLE_INTR NVIC_ENABLE_IRQ(IRQ_FTM1)
#define TIMER_DISABLE_INTR NVIC_DISABLE_IRQ(IRQ_FTM1)
#define TIMER_INTR_NAME ftm1_isr
#ifdef ISR
#undef ISR
#endif
#define ISR(f) void f(void)
#define TIMER_CONFIG_KHZ(val) ({ \
SIM_SCGC6 |= SIM_SCGC6_TPM1; \
FTM1_SC = 0; \
FTM1_CNT = 0; \
FTM1_MOD = (F_PLL/2000) / val - 1; \
FTM1_C0V = (F_PLL/6000) / val - 1; \
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0); \
})
#define TIMER_CONFIG_NORMAL() ({ \
SIM_SCGC6 |= SIM_SCGC6_TPM1; \
FTM1_SC = 0; \
FTM1_CNT = 0; \
FTM1_MOD = (F_PLL/40000) - 1; \
FTM1_C0V = 0; \
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE; \
})
#define SEND_PIN 16
// defines for timer_tiny0 (8 bits)
#elif defined(IR_USE_TIMER_TINY0)
#define TIMER_RESET
#define TIMER_ENABLE_PWM (TCCR0A |= _BV(COM0B1))
#define TIMER_DISABLE_PWM (TCCR0A &= ~(_BV(COM0B1)))
#define TIMER_ENABLE_INTR (TIMSK |= _BV(OCIE0A))
#define TIMER_DISABLE_INTR (TIMSK &= ~(_BV(OCIE0A)))
#define TIMER_INTR_NAME TIMER0_COMPA_vect
#define TIMER_CONFIG_KHZ(val) ({ \
const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
TCCR0A = _BV(WGM00); \
TCCR0B = _BV(WGM02) | _BV(CS00); \
OCR0A = pwmval; \
OCR0B = pwmval / 3; \
})
#define TIMER_COUNT_TOP (SYSCLOCK * USECPERTICK / 1000000)
#if (TIMER_COUNT_TOP < 256)
#define TIMER_CONFIG_NORMAL() ({ \
TCCR0A = _BV(WGM01); \
TCCR0B = _BV(CS00); \
OCR0A = TIMER_COUNT_TOP; \
TCNT0 = 0; \
})
#else
#define TIMER_CONFIG_NORMAL() ({ \
TCCR0A = _BV(WGM01); \
TCCR0B = _BV(CS01); \
OCR0A = TIMER_COUNT_TOP / 8; \
TCNT0 = 0; \
})
#endif
#define SEND_PIN 1 /* ATtiny85 */
//---------------------------------------------------------
// ESP32 (ESP8266 should likely be added here too)
//
// ESP32 has it own timer API and does not use these macros, but to avoid ifdef'ing
// them out in the common code, they are defined to no-op. This allows the code to compile
// (which it wouldn't otherwise) but irsend will not work until ESP32 specific code is written
// for that -- merlin
// As a warning, sending timing specific code from an ESP32 can be challenging if you need 100%
// reliability because the arduino code may be interrupted and cause your sent waveform to be the
// wrong length. This is specifically an issue for neopixels which require 800Khz resolution.
// IR may just work as is with the common code since it's lower frequency, but if not, the other
// way to do this on ESP32 is using the RMT built in driver like in this incomplete library below
// https://github.com/ExploreEmbedded/ESP32_RMT
#elif defined(IR_TIMER_USE_ESP32)
#define TIMER_RESET
#ifdef ISR
# undef ISR
#endif
#define ISR(f) void IRTimer()
#elif defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
// use timer 3 hardcoded at this time
#define TIMER_RESET
#define TIMER_ENABLE_PWM // Not presently used
#define TIMER_DISABLE_PWM
#define TIMER_ENABLE_INTR NVIC_EnableIRQ(TC3_IRQn) // Not presently used
#define TIMER_DISABLE_INTR NVIC_DisableIRQ(TC3_IRQn)
#define TIMER_INTR_NAME TC3_Handler // Not presently used
#define TIMER_CONFIG_KHZ(f)
#ifdef ISR
# undef ISR
#endif
#define ISR(f) void irs()
//---------------------------------------------------------
// Unknown Timer
//
#else
# error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
#endif
// Provide default definitions, portable but possibly slower than necessary.
#ifndef SENDPIN_ON
#define SENDPIN_ON(pin) digitalWrite(pin, HIGH)
#endif
#ifndef SENDPIN_OFF
#define SENDPIN_OFF(pin) digitalWrite(pin, LOW)
#endif
#endif // ! boarddefs_h

81
IRremote/changelog.txt Normal file
View File

@ -0,0 +1,81 @@
## 2.4.0 - 2017/08/10
- Cleanup of hardware dependencies. Merge in SAM support [PR #437](https://github.com/z3t0/Arduino-IRremote/pull/437)
## 2.3.3 - 2017/03/31
- Added ESP32 IR receive support [PR #427](https://github.com/z3t0/Arduino-IRremote/pull/425)
## 2.2.3 - 2017/03/27
- Fix calculation of pause length in LEGO PF protocol [PR #427](https://github.com/z3t0/Arduino-IRremote/pull/427)
## 2.2.2 - 2017/01/20
- Fixed naming bug [PR #398](https://github.com/z3t0/Arduino-IRremote/pull/398)
## 2.2.1 - 2016/07/27
- Added tests for Lego Power Functions Protocol [PR #336](https://github.com/z3t0/Arduino-IRremote/pull/336)
## 2.2.0 - 2016/06/28
- Added support for ATmega8535
- Added support for ATmega16
- Added support for ATmega32
- Added support for ATmega164
- Added support for ATmega324
- Added support for ATmega644
- Added support for ATmega1284
- Added support for ATmega64
- Added support for ATmega128
[PR](https://github.com/z3t0/Arduino-IRremote/pull/324)
## 2.1.1 - 2016/05/04
- Added Lego Power Functions Protocol [PR #309](https://github.com/z3t0/Arduino-IRremote/pull/309)
## 2.1.0 - 2016/02/20
- Improved Debugging [PR #258](https://github.com/z3t0/Arduino-IRremote/pull/258)
- Display TIME instead of TICKS [PR #258](https://github.com/z3t0/Arduino-IRremote/pull/258)
## 2.0.4 - 2016/02/20
- Add Panasonic and JVC to IRrecord example [PR](https://github.com/z3t0/Arduino-IRremote/pull/54)
## 2.0.3 - 2016/02/20
- Change IRSend Raw parameter to const [PR](https://github.com/z3t0/Arduino-IRremote/pull/227)
## 2.0.2 - 2015/12/02
- Added IRremoteInfo Sketch - [PR](https://github.com/z3t0/Arduino-IRremote/pull/241)
- Enforcing changelog.md
## 2.0.1 - 2015/07/26 - [Release](https://github.com/shirriff/Arduino-IRremote/releases/tag/BETA)
### Changes
- Updated README
- Updated Contributors
- Fixed #110 Mess
- Created Gitter Room
- Added Gitter Badge
- Standardised Code Base
- Clean Debug Output
- Optimized Send Loops
- Modularized Design
- Optimized and Updated Examples
- Improved Documentation
- Fixed and Improved many coding errors
- Fixed Aiwa RC-T501 Decoding
- Fixed Interrupt on ATmega8
- Switched to Stable Release of @PlatformIO
### Additions
- Added Aiwa RC-T501 Protocol
- Added Denon Protocol
- Added Pronto Support
- Added Library Properties
- Added Template For New Protocols
- Added this changelog
- Added Teensy LC Support
- Added ATtiny84 Support
- Added ATtiny85 Support
- Added isIdle method
### Deletions
- Removed (Fixed) #110
- Broke Teensy 3 / 3.1 Support
### Not Working
- Teensy 3 / 3.1 Support is in Development

39
IRremote/esp32.cpp Normal file
View File

@ -0,0 +1,39 @@
#ifdef ESP32
// This file contains functions specific to the ESP32.
#include "IRremote.h"
#include "IRremoteInt.h"
// "Idiot check"
#ifdef USE_DEFAULT_ENABLE_IR_IN
#error Must undef USE_DEFAULT_ENABLE_IR_IN
#endif
hw_timer_t *timer;
void IRTimer(); // defined in IRremote.cpp, masqueraded as ISR(TIMER_INTR_NAME)
//+=============================================================================
// initialization
//
void IRrecv::enableIRIn ( )
{
// Interrupt Service Routine - Fires every 50uS
// ESP32 has a proper API to setup timers, no weird chip macros needed
// simply call the readable API versions :)
// 3 timers, choose #1, 80 divider nanosecond precision, 1 to count up
timer = timerBegin(1, 80, 1);
timerAttachInterrupt(timer, &IRTimer, 1);
// every 50ns, autoreload = true
timerAlarmWrite(timer, 50, true);
timerAlarmEnable(timer);
// Initialize state machine variables
irparams.rcvstate = STATE_IDLE;
irparams.rawlen = 0;
// Set pin modes
pinMode(irparams.recvpin, INPUT);
}
#endif // ESP32

513
IRremote/irPronto.cpp Normal file
View File

@ -0,0 +1,513 @@
#define TEST 0
#if TEST
# define SEND_PRONTO 1
# define PRONTO_ONCE false
# define PRONTO_REPEAT true
# define PRONTO_FALLBACK true
# define PRONTO_NOFALLBACK false
#endif
#if SEND_PRONTO
//******************************************************************************
#if TEST
# include <stdio.h>
void enableIROut (int freq) { printf("\nFreq = %d KHz\n", freq); }
void mark (int t) { printf("+%d," , t); }
void space (int t) { printf("-%d, ", t); }
#else
# include "IRremote.h"
#endif // TEST
//+=============================================================================
// Check for a valid hex digit
//
bool ishex (char ch)
{
return ( ((ch >= '0') && (ch <= '9')) ||
((ch >= 'A') && (ch <= 'F')) ||
((ch >= 'a') && (ch <= 'f')) ) ? true : false ;
}
//+=============================================================================
// Check for a valid "blank" ... '\0' is a valid "blank"
//
bool isblank (char ch)
{
return ((ch == ' ') || (ch == '\t') || (ch == '\0')) ? true : false ;
}
//+=============================================================================
// Bypass spaces
//
bool byp (char** pcp)
{
while (isblank(**pcp)) (*pcp)++ ;
}
//+=============================================================================
// Hex-to-Byte : Decode a hex digit
// We assume the character has already been validated
//
uint8_t htob (char ch)
{
if ((ch >= '0') && (ch <= '9')) return ch - '0' ;
if ((ch >= 'A') && (ch <= 'F')) return ch - 'A' + 10 ;
if ((ch >= 'a') && (ch <= 'f')) return ch - 'a' + 10 ;
}
//+=============================================================================
// Hex-to-Word : Decode a block of 4 hex digits
// We assume the string has already been validated
// and the pointer being passed points at the start of a block of 4 hex digits
//
uint16_t htow (char* cp)
{
return ( (htob(cp[0]) << 12) | (htob(cp[1]) << 8) |
(htob(cp[2]) << 4) | (htob(cp[3]) ) ) ;
}
//+=============================================================================
//
bool sendPronto (char* s, bool repeat, bool fallback)
{
int i;
int len;
int skip;
char* cp;
uint16_t freq; // Frequency in KHz
uint8_t usec; // pronto uSec/tick
uint8_t once;
uint8_t rpt;
// Validate the string
for (cp = s; *cp; cp += 4) {
byp(&cp);
if ( !ishex(cp[0]) || !ishex(cp[1]) ||
!ishex(cp[2]) || !ishex(cp[3]) || !isblank(cp[4]) ) return false ;
}
// We will use cp to traverse the string
cp = s;
// Check mode = Oscillated/Learned
byp(&cp);
if (htow(cp) != 0000) return false;
cp += 4;
// Extract & set frequency
byp(&cp);
freq = (int)(1000000 / (htow(cp) * 0.241246)); // Rounding errors will occur, tolerance is +/- 10%
usec = (int)(((1.0 / freq) * 1000000) + 0.5); // Another rounding error, thank Cod for analogue electronics
freq /= 1000; // This will introduce a(nother) rounding error which we do not want in the usec calcualtion
cp += 4;
// Get length of "once" code
byp(&cp);
once = htow(cp);
cp += 4;
// Get length of "repeat" code
byp(&cp);
rpt = htow(cp);
cp += 4;
// Which code are we sending?
if (fallback) { // fallback on the "other" code if "this" code is not present
if (!repeat) { // requested 'once'
if (once) len = once * 2, skip = 0 ; // if once exists send it
else len = rpt * 2, skip = 0 ; // else send repeat code
} else { // requested 'repeat'
if (rpt) len = rpt * 2, skip = 0 ; // if rpt exists send it
else len = once * 2, skip = 0 ; // else send once code
}
} else { // Send what we asked for, do not fallback if the code is empty!
if (!repeat) len = once * 2, skip = 0 ; // 'once' starts at 0
else len = rpt * 2, skip = once ; // 'repeat' starts where 'once' ends
}
// Skip to start of code
for (i = 0; i < skip; i++, cp += 4) byp(&cp) ;
// Send code
enableIROut(freq);
for (i = 0; i < len; i++) {
byp(&cp);
if (i & 1) space(htow(cp) * usec);
else mark (htow(cp) * usec);
cp += 4;
}
}
//+=============================================================================
#if TEST
int main ( )
{
char prontoTest[] =
"0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 " // 10
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 20
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 30
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " // 40
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 50
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " // 60
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 70
"0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 " // 80
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " // 90
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " // 100
"0010 0030 0010 0aa6"; // 104
sendPronto(prontoTest, PRONTO_ONCE, PRONTO_FALLBACK); // once code
sendPronto(prontoTest, PRONTO_REPEAT, PRONTO_FALLBACK); // repeat code
sendPronto(prontoTest, PRONTO_ONCE, PRONTO_NOFALLBACK); // once code
sendPronto(prontoTest, PRONTO_REPEAT, PRONTO_NOFALLBACK); // repeat code
return 0;
}
#endif // TEST
#endif // SEND_PRONTO
#if 0
//******************************************************************************
// Sources:
// http://www.remotecentral.com/features/irdisp2.htm
// http://www.hifi-remote.com/wiki/index.php?title=Working_With_Pronto_Hex
//******************************************************************************
#include <stdint.h>
#include <stdio.h>
#define IRPRONTO
#include "IRremoteInt.h" // The Arduino IRremote library defines USECPERTICK
//------------------------------------------------------------------------------
// Source: https://www.google.co.uk/search?q=DENON+MASTER+IR+Hex+Command+Sheet
// -> http://assets.denon.com/documentmaster/us/denon%20master%20ir%20hex.xls
//
char prontoTest[] =
"0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 " // 10
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 20
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 30
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " // 40
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 50
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " // 60
"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " // 70
"0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 " // 80
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " // 90
"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " // 100
"0010 0030 0010 0aa6"; // 104
//------------------------------------------------------------------------------
// This is the longest code we can support
#define CODEMAX 200
//------------------------------------------------------------------------------
// This is the data we pull out of the pronto code
typedef
struct {
int freq; // Carrier frequency (in Hz)
int usec; // uSec per tick (based on freq)
int codeLen; // Length of code
uint16_t code[CODEMAX]; // Code in hex
int onceLen; // Length of "once" transmit
uint16_t* once; // Pointer to start within 'code'
int rptLen; // Length of "repeat" transmit
uint16_t* rpt; // Pointer to start within 'code'
}
pronto_t;
//------------------------------------------------------------------------------
// From what I have seen, the only time we go over 8-bits is the 'space'
// on the end which creates the lead-out/inter-code gap. Assuming I'm right,
// we can code this up as a special case and otherwise halve the size of our
// data!
// Ignoring the first four values (the config data) and the last value
// (the lead-out), if you find a protocol that uses values greater than 00fe
// we are going to have to revisit this code!
//
//
// So, the 0th byte will be the carrier frequency in Khz (NOT Hz)
// " 1st " " " " length of the "once" code
// " 2nd " " " " length of the "repeat" code
//
// Thereafter, odd bytes will be Mark lengths as a multiple of USECPERTICK uS
// even " " " Space " " " " " " "
//
// Any occurence of "FF" in either a Mark or a Space will indicate
// "Use the 16-bit FF value" which will also be a multiple of USECPERTICK uS
//
//
// As a point of comparison, the test code (prontoTest[]) is 520 bytes
// (yes, more than 0.5KB of our Arduino's precious 32KB) ... after conversion
// to pronto hex that goes down to ((520/5)*2) = 208 bytes ... once converted to
// our format we are down to ((208/2) -1 -1 +2) = 104 bytes
//
// In fariness this is still very memory-hungry
// ...As a rough guide:
// 10 codes cost 1K of memory (this will vary depending on the protocol).
//
// So if you're building a complex remote control, you will probably need to
// keep the codes on an external memory device (not in the Arduino sketch) and
// load them as you need them. Hmmm.
//
// This dictates that "Oscillated Pronto Codes" are probably NOT the way forward
//
// For example, prontoTest[] happens to be: A 48-bit IR code in Denon format
// So we know it starts with 80/40 (Denon header)
// and ends with 10/aa6 (Denon leadout)
// and all (48) bits in between are either 10/10 (Denon 0)
// or 10/30 (Denon 1)
// So we could easily store this data in 1-byte ("Denon")
// + 1-byte (Length=48)
// + 6-bytes (IR code)
// At 8-bytes per code, we can store 128 codes in 1KB or memory - that's a lot
// better than the 2 (two) we started off with!
//
// And serendipitously, by reducing the amount of data, our program will run
// a LOT faster!
//
// Again, I repeat, even after you have spent time converting the "Oscillated
// Pronto Codes" in to IRremote format, it will be a LOT more memory-hungry
// than using sendDenon() (or whichever) ...BUT these codes are easily
// available on the internet, so we'll support them!
//
typedef
struct {
uint16_t FF;
uint8_t code[CODEMAX];
}
irCode_t;
//------------------------------------------------------------------------------
#define DEBUGF(...) printf(__VA_ARGS__)
//+=============================================================================
// String must be block of 4 hex digits separated with blanks
//
bool validate (char* cp, int* len)
{
for (*len = 0; *cp; (*len)++, cp += 4) {
byp(&cp);
if ( !ishex(cp[0]) || !ishex(cp[1]) ||
!ishex(cp[2]) || !ishex(cp[3]) || !isblank(cp[4]) ) return false ;
}
return true;
}
//+=============================================================================
// Hex-to-Byte : Decode a hex digit
// We assume the character has already been validated
//
uint8_t htob (char ch)
{
if ((ch >= '0') && (ch <= '9')) return ch - '0' ;
if ((ch >= 'A') && (ch <= 'F')) return ch - 'A' + 10 ;
if ((ch >= 'a') && (ch <= 'f')) return ch - 'a' + 10 ;
}
//+=============================================================================
// Hex-to-Word : Decode a block of 4 hex digits
// We assume the string has already been validated
// and the pointer being passed points at the start of a block of 4 hex digits
//
uint16_t htow (char* cp)
{
return ( (htob(cp[0]) << 12) | (htob(cp[1]) << 8) |
(htob(cp[2]) << 4) | (htob(cp[3]) ) ) ;
}
//+=============================================================================
// Convert the pronto string in to data
//
bool decode (char* s, pronto_t* p, irCode_t* ir)
{
int i, len;
char* cp;
// Validate the Pronto string
if (!validate(s, &p->codeLen)) {
DEBUGF("Invalid pronto string\n");
return false ;
}
DEBUGF("Found %d hex codes\n", p->codeLen);
// Allocate memory to store the decoded string
//if (!(p->code = malloc(p->len))) {
// DEBUGF("Memory allocation failed\n");
// return false ;
//}
// Check in case our code is too long
if (p->codeLen > CODEMAX) {
DEBUGF("Code too long, edit CODEMAX and recompile\n");
return false ;
}
// Decode the string
cp = s;
for (i = 0; i < p->codeLen; i++, cp += 4) {
byp(&cp);
p->code[i] = htow(cp);
}
// Announce our findings
DEBUGF("Input: |%s|\n", s);
DEBUGF("Found: |");
for (i = 0; i < p->codeLen; i++) DEBUGF("%04x ", p->code[i]) ;
DEBUGF("|\n");
DEBUGF("Form [%04X] : ", p->code[0]);
if (p->code[0] == 0x0000) DEBUGF("Oscillated (Learned)\n");
else if (p->code[0] == 0x0100) DEBUGF("Unmodulated\n");
else DEBUGF("Unknown\n");
if (p->code[0] != 0x0000) return false ; // Can only handle Oscillated
// Calculate the carrier frequency (+/- 10%) & uSecs per pulse
// Pronto uses a crystal which generates a timeabse of 0.241246
p->freq = (int)(1000000 / (p->code[1] * 0.241246));
p->usec = (int)(((1.0 / p->freq) * 1000000) + 0.5);
ir->code[0] = p->freq / 1000;
DEBUGF("Freq [%04X] : %d Hz (%d uS/pluse) -> %d KHz\n",
p->code[1], p->freq, p->usec, ir->code[0]);
// Set the length & start pointer for the "once" code
p->onceLen = p->code[2];
p->once = &p->code[4];
ir->code[1] = p->onceLen;
DEBUGF("Once [%04X] : %d\n", p->code[2], p->onceLen);
// Set the length & start pointer for the "repeat" code
p->rptLen = p->code[3];
p->rpt = &p->code[4 + p->onceLen];
ir->code[2] = p->rptLen;
DEBUGF("Rpt [%04X] : %d\n", p->code[3], p->rptLen);
// Check everything tallies
if (1 + 1 + 1 + 1 + (p->onceLen * 2) + (p->rptLen * 2) != p->codeLen) {
DEBUGF("Bad code length\n");
return false;
}
// Convert the IR data to our new format
ir->FF = p->code[p->codeLen - 1];
len = (p->onceLen * 2) + (p->rptLen * 2);
DEBUGF("Encoded: |");
for (i = 0; i < len; i++) {
if (p->code[i+4] == ir->FF) {
ir->code[i+3] = 0xFF;
} else if (p->code[i+4] > 0xFE) {
DEBUGF("\n%04X : Mark/Space overflow\n", p->code[i+4]);
return false;
} else {
ir->code[i+3] = (p->code[i+4] * p->usec) / USECPERTICK;
}
DEBUGF("%s%d", !i ? "" : (i&1 ? "," : ", "), ir->code[i+3]);
}
DEBUGF("|\n");
ir->FF = (ir->FF * p->usec) / USECPERTICK;
DEBUGF("FF -> %d\n", ir->FF);
return true;
}
//+=============================================================================
//
void irDump (irCode_t* ir)
{
int i, len;
printf("uint8_t buttonName[%d] = {", len);
printf("%d,%d, ", (ir->FF >> 8), ir->FF & 0xFF);
printf("%d,%d,%d, ", ir->code[0], ir->code[1], ir->code[2]);
len = (ir->code[1] * 2) + (ir->code[2] * 2);
for (i = 0; i < len; i++) {
printf("%s%d", !i ? "" : (i&1 ? "," : ", "), ir->code[i+3]);
}
printf("};\n");
}
//+=============================================================================
//
int main ( )
{
pronto_t pCode;
irCode_t irCode;
decode(prontoTest, &pCode, &irCode);
irDump(&irCode);
return 0;
}
#endif //0

223
IRremote/irRecv.cpp Normal file
View File

@ -0,0 +1,223 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//+=============================================================================
// Decodes the received IR message
// Returns 0 if no data ready, 1 if data ready.
// Results of decoding are stored in results
//
int IRrecv::decode (decode_results *results)
{
results->rawbuf = irparams.rawbuf;
results->rawlen = irparams.rawlen;
results->overflow = irparams.overflow;
if (irparams.rcvstate != STATE_STOP) return false ;
#if DECODE_NEC
DBG_PRINTLN("Attempting NEC decode");
if (decodeNEC(results)) return true ;
#endif
#if DECODE_SONY
DBG_PRINTLN("Attempting Sony decode");
if (decodeSony(results)) return true ;
#endif
#if DECODE_SANYO
DBG_PRINTLN("Attempting Sanyo decode");
if (decodeSanyo(results)) return true ;
#endif
#if DECODE_MITSUBISHI
DBG_PRINTLN("Attempting Mitsubishi decode");
if (decodeMitsubishi(results)) return true ;
#endif
#if DECODE_RC5
DBG_PRINTLN("Attempting RC5 decode");
if (decodeRC5(results)) return true ;
#endif
#if DECODE_RC6
DBG_PRINTLN("Attempting RC6 decode");
if (decodeRC6(results)) return true ;
#endif
#if DECODE_PANASONIC
DBG_PRINTLN("Attempting Panasonic decode");
if (decodePanasonic(results)) return true ;
#endif
#if DECODE_LG
DBG_PRINTLN("Attempting LG decode");
if (decodeLG(results)) return true ;
#endif
#if DECODE_JVC
DBG_PRINTLN("Attempting JVC decode");
if (decodeJVC(results)) return true ;
#endif
#if DECODE_SAMSUNG
DBG_PRINTLN("Attempting SAMSUNG decode");
if (decodeSAMSUNG(results)) return true ;
#endif
#if DECODE_WHYNTER
DBG_PRINTLN("Attempting Whynter decode");
if (decodeWhynter(results)) return true ;
#endif
#if DECODE_AIWA_RC_T501
DBG_PRINTLN("Attempting Aiwa RC-T501 decode");
if (decodeAiwaRCT501(results)) return true ;
#endif
#if DECODE_DENON
DBG_PRINTLN("Attempting Denon decode");
if (decodeDenon(results)) return true ;
#endif
#if DECODE_LEGO_PF
DBG_PRINTLN("Attempting Lego Power Functions");
if (decodeLegoPowerFunctions(results)) return true ;
#endif
// decodeHash returns a hash on any input.
// Thus, it needs to be last in the list.
// If you add any decodes, add them before this.
if (decodeHash(results)) return true ;
// Throw away and start over
resume();
return false;
}
//+=============================================================================
IRrecv::IRrecv (int recvpin)
{
irparams.recvpin = recvpin;
irparams.blinkflag = 0;
}
IRrecv::IRrecv (int recvpin, int blinkpin)
{
irparams.recvpin = recvpin;
irparams.blinkpin = blinkpin;
pinMode(blinkpin, OUTPUT);
irparams.blinkflag = 0;
}
//+=============================================================================
// initialization
//
#ifdef USE_DEFAULT_ENABLE_IR_IN
void IRrecv::enableIRIn ( )
{
// Interrupt Service Routine - Fires every 50uS
cli();
// Setup pulse clock timer interrupt
// Prescale /8 (16M/8 = 0.5 microseconds per tick)
// Therefore, the timer interval can range from 0.5 to 128 microseconds
// Depending on the reset value (255 to 0)
TIMER_CONFIG_NORMAL();
// Timer2 Overflow Interrupt Enable
TIMER_ENABLE_INTR;
TIMER_RESET;
sei(); // enable interrupts
// Initialize state machine variables
irparams.rcvstate = STATE_IDLE;
irparams.rawlen = 0;
// Set pin modes
pinMode(irparams.recvpin, INPUT);
}
#endif // USE_DEFAULT_ENABLE_IR_IN
//+=============================================================================
// Enable/disable blinking of pin 13 on IR processing
//
void IRrecv::blink13 (int blinkflag)
{
#ifdef BLINKLED
irparams.blinkflag = blinkflag;
if (blinkflag) pinMode(BLINKLED, OUTPUT) ;
#endif
}
//+=============================================================================
// Return if receiving new IR signals
//
bool IRrecv::isIdle ( )
{
return (irparams.rcvstate == STATE_IDLE || irparams.rcvstate == STATE_STOP) ? true : false;
}
//+=============================================================================
// Restart the ISR state machine
//
void IRrecv::resume ( )
{
irparams.rcvstate = STATE_IDLE;
irparams.rawlen = 0;
}
//+=============================================================================
// hashdecode - decode an arbitrary IR code.
// Instead of decoding using a standard encoding scheme
// (e.g. Sony, NEC, RC5), the code is hashed to a 32-bit value.
//
// The algorithm: look at the sequence of MARK signals, and see if each one
// is shorter (0), the same length (1), or longer (2) than the previous.
// Do the same with the SPACE signals. Hash the resulting sequence of 0's,
// 1's, and 2's to a 32-bit value. This will give a unique value for each
// different code (probably), for most code systems.
//
// http://arcfn.com/2010/01/using-arbitrary-remotes-with-arduino.html
//
// Compare two tick values, returning 0 if newval is shorter,
// 1 if newval is equal, and 2 if newval is longer
// Use a tolerance of 20%
//
int IRrecv::compare (unsigned int oldval, unsigned int newval)
{
if (newval < oldval * .8) return 0 ;
else if (oldval < newval * .8) return 2 ;
else return 1 ;
}
//+=============================================================================
// Use FNV hash algorithm: http://isthe.com/chongo/tech/comp/fnv/#FNV-param
// Converts the raw code values into a 32-bit hash code.
// Hopefully this code is unique for each button.
// This isn't a "real" decoding, just an arbitrary value.
//
#define FNV_PRIME_32 16777619
#define FNV_BASIS_32 2166136261
long IRrecv::decodeHash (decode_results *results)
{
long hash = FNV_BASIS_32;
// Require at least 6 samples to prevent triggering on noise
if (results->rawlen < 6) return false ;
for (int i = 1; (i + 2) < results->rawlen; i++) {
int value = compare(results->rawbuf[i], results->rawbuf[i+2]);
// Add value into the hash
hash = (hash * FNV_PRIME_32) ^ value;
}
results->value = hash;
results->bits = 32;
results->decode_type = UNKNOWN;
return true;
}

139
IRremote/irSend.cpp Normal file
View File

@ -0,0 +1,139 @@
#include "IRremote.h"
#include "IRremoteInt.h"
#ifdef SENDING_SUPPORTED
//+=============================================================================
void IRsend::sendRaw (const unsigned int buf[], unsigned int len, unsigned int hz)
{
// Set IR carrier frequency
enableIROut(hz);
for (unsigned int i = 0; i < len; i++) {
if (i & 1) space(buf[i]) ;
else mark (buf[i]) ;
}
space(0); // Always end with the LED off
}
#ifdef USE_SOFT_CARRIER
void inline IRsend::sleepMicros(unsigned long us)
{
#ifdef USE_SPIN_WAIT
sleepUntilMicros(micros() + us);
#else
if (us > 0U) // Is this necessary? (Official docu https://www.arduino.cc/en/Reference/DelayMicroseconds does not tell.)
delayMicroseconds((unsigned int) us);
#endif
}
void inline IRsend::sleepUntilMicros(unsigned long targetTime)
{
#ifdef USE_SPIN_WAIT
while (micros() < targetTime)
;
#else
unsigned long now = micros();
if (now < targetTime)
sleepMicros(targetTime - now);
#endif
}
#endif // USE_SOFT_CARRIER
//+=============================================================================
// Sends an IR mark for the specified number of microseconds.
// The mark output is modulated at the PWM frequency.
//
void IRsend::mark(unsigned int time)
{
#ifdef USE_SOFT_CARRIER
unsigned long start = micros();
unsigned long stop = start + time;
if (stop + periodTime < start)
// Counter wrap-around, happens very seldomly, but CAN happen.
// Just give up instead of possibly damaging the hardware.
return;
unsigned long nextPeriodEnding = start;
unsigned long now = micros();
while (now < stop) {
SENDPIN_ON(sendPin);
sleepMicros(periodOnTime);
SENDPIN_OFF(sendPin);
nextPeriodEnding += periodTime;
sleepUntilMicros(nextPeriodEnding);
now = micros();
}
#else
TIMER_ENABLE_PWM; // Enable pin 3 PWM output
if (time > 0) custom_delay_usec(time);
#endif
}
//+=============================================================================
// Leave pin off for time (given in microseconds)
// Sends an IR space for the specified number of microseconds.
// A space is no output, so the PWM output is disabled.
//
void IRsend::space (unsigned int time)
{
TIMER_DISABLE_PWM; // Disable pin 3 PWM output
if (time > 0) IRsend::custom_delay_usec(time);
}
//+=============================================================================
// Enables IR output. The khz value controls the modulation frequency in kilohertz.
// The IR output will be on pin 3 (OC2B).
// This routine is designed for 36-40KHz; if you use it for other values, it's up to you
// to make sure it gives reasonable results. (Watch out for overflow / underflow / rounding.)
// TIMER2 is used in phase-correct PWM mode, with OCR2A controlling the frequency and OCR2B
// controlling the duty cycle.
// There is no prescaling, so the output frequency is 16MHz / (2 * OCR2A)
// To turn the output on and off, we leave the PWM running, but connect and disconnect the output pin.
// A few hours staring at the ATmega documentation and this will all make sense.
// See my Secrets of Arduino PWM at http://arcfn.com/2009/07/secrets-of-arduino-pwm.html for details.
//
void IRsend::enableIROut (int khz)
{
#ifdef USE_SOFT_CARRIER
periodTime = (1000U + khz/2) / khz; // = 1000/khz + 1/2 = round(1000.0/khz)
periodOnTime = periodTime * DUTY_CYCLE / 100U - PULSE_CORRECTION;
#endif
// Disable the Timer2 Interrupt (which is used for receiving IR)
TIMER_DISABLE_INTR; //Timer2 Overflow Interrupt
pinMode(sendPin, OUTPUT);
SENDPIN_OFF(sendPin); // When not sending, we want it low
// COM2A = 00: disconnect OC2A
// COM2B = 00: disconnect OC2B; to send signal set to 10: OC2B non-inverted
// WGM2 = 101: phase-correct PWM with OCRA as top
// CS2 = 000: no prescaling
// The top value for the timer. The modulation frequency will be SYSCLOCK / 2 / OCR2A.
TIMER_CONFIG_KHZ(khz);
}
//+=============================================================================
// Custom delay function that circumvents Arduino's delayMicroseconds limit
void IRsend::custom_delay_usec(unsigned long uSecs) {
if (uSecs > 4) {
unsigned long start = micros();
unsigned long endMicros = start + uSecs - 4;
if (endMicros < start) { // Check if overflow
while ( micros() > start ) {} // wait until overflow
}
while ( micros() < endMicros ) {} // normal wait
}
//else {
// __asm__("nop\n\t"); // must have or compiler optimizes out
//}
}
#endif // SENDING_SUPPORTED

105
IRremote/ir_Aiwa.cpp Normal file
View File

@ -0,0 +1,105 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// AAA IIIII W W AAA
// A A I W W A A
// AAAAA I W W W AAAAA
// A A I W W W A A
// A A IIIII WWW A A
//==============================================================================
// Based off the RC-T501 RCU
// Lirc file http://lirc.sourceforge.net/remotes/aiwa/RC-T501
#define AIWA_RC_T501_HZ 38
#define AIWA_RC_T501_BITS 15
#define AIWA_RC_T501_PRE_BITS 26
#define AIWA_RC_T501_POST_BITS 1
#define AIWA_RC_T501_SUM_BITS (AIWA_RC_T501_PRE_BITS + AIWA_RC_T501_BITS + AIWA_RC_T501_POST_BITS)
#define AIWA_RC_T501_HDR_MARK 8800
#define AIWA_RC_T501_HDR_SPACE 4500
#define AIWA_RC_T501_BIT_MARK 500
#define AIWA_RC_T501_ONE_SPACE 600
#define AIWA_RC_T501_ZERO_SPACE 1700
//+=============================================================================
#if SEND_AIWA_RC_T501
void IRsend::sendAiwaRCT501 (int code)
{
unsigned long pre = 0x0227EEC0; // 26-bits
// Set IR carrier frequency
enableIROut(AIWA_RC_T501_HZ);
// Header
mark(AIWA_RC_T501_HDR_MARK);
space(AIWA_RC_T501_HDR_SPACE);
// Send "pre" data
for (unsigned long mask = 1UL << (26 - 1); mask; mask >>= 1) {
mark(AIWA_RC_T501_BIT_MARK);
if (pre & mask) space(AIWA_RC_T501_ONE_SPACE) ;
else space(AIWA_RC_T501_ZERO_SPACE) ;
}
//-v- THIS CODE LOOKS LIKE IT MIGHT BE WRONG - CHECK!
// it only send 15bits and ignores the top bit
// then uses TOPBIT which is 0x80000000 to check the bit code
// I suspect TOPBIT should be changed to 0x00008000
// Skip first code bit
code <<= 1;
// Send code
for (int i = 0; i < 15; i++) {
mark(AIWA_RC_T501_BIT_MARK);
if (code & 0x80000000) space(AIWA_RC_T501_ONE_SPACE) ;
else space(AIWA_RC_T501_ZERO_SPACE) ;
code <<= 1;
}
//-^- THIS CODE LOOKS LIKE IT MIGHT BE WRONG - CHECK!
// POST-DATA, 1 bit, 0x0
mark(AIWA_RC_T501_BIT_MARK);
space(AIWA_RC_T501_ZERO_SPACE);
mark(AIWA_RC_T501_BIT_MARK);
space(0);
}
#endif
//+=============================================================================
#if DECODE_AIWA_RC_T501
bool IRrecv::decodeAiwaRCT501 (decode_results *results)
{
int data = 0;
int offset = 1;
// Check SIZE
if (irparams.rawlen < 2 * (AIWA_RC_T501_SUM_BITS) + 4) return false ;
// Check HDR Mark/Space
if (!MATCH_MARK (results->rawbuf[offset++], AIWA_RC_T501_HDR_MARK )) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], AIWA_RC_T501_HDR_SPACE)) return false ;
offset += 26; // skip pre-data - optional
while(offset < irparams.rawlen - 4) {
if (MATCH_MARK(results->rawbuf[offset], AIWA_RC_T501_BIT_MARK)) offset++ ;
else return false ;
// ONE & ZERO
if (MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ONE_SPACE)) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ZERO_SPACE)) data = (data << 1) | 0 ;
else break ; // End of one & zero detected
offset++;
}
results->bits = (offset - 1) / 2;
if (results->bits < 42) return false ;
results->value = data;
results->decode_type = AIWA_RC_T501;
return true;
}
#endif

94
IRremote/ir_Denon.cpp Normal file
View File

@ -0,0 +1,94 @@
#include "IRremote.h"
#include "IRremoteInt.h"
// Reverse Engineered by looking at RAW dumps generated by IRremote
// I have since discovered that Denon publish all their IR codes:
// https://www.google.co.uk/search?q=DENON+MASTER+IR+Hex+Command+Sheet
// -> http://assets.denon.com/documentmaster/us/denon%20master%20ir%20hex.xls
// Having looked at the official Denon Pronto sheet and reverse engineered
// the timing values from it, it is obvious that Denon have a range of
// different timings and protocols ...the values here work for my AVR-3801 Amp!
//==============================================================================
// DDDD EEEEE N N OOO N N
// D D E NN N O O NN N
// D D EEE N N N O O N N N
// D D E N NN O O N NN
// DDDD EEEEE N N OOO N N
//==============================================================================
#define BITS 14 // The number of bits in the command
#define HDR_MARK 300 // The length of the Header:Mark
#define HDR_SPACE 750 // The lenght of the Header:Space
#define BIT_MARK 300 // The length of a Bit:Mark
#define ONE_SPACE 1800 // The length of a Bit:Space for 1's
#define ZERO_SPACE 750 // The length of a Bit:Space for 0's
//+=============================================================================
//
#if SEND_DENON
void IRsend::sendDenon (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(38);
// Header
mark (HDR_MARK);
space(HDR_SPACE);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark (BIT_MARK);
space(ONE_SPACE);
} else {
mark (BIT_MARK);
space(ZERO_SPACE);
}
}
// Footer
mark(BIT_MARK);
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
//
#if DECODE_DENON
bool IRrecv::decodeDenon (decode_results *results)
{
unsigned long data = 0; // Somewhere to build our code
int offset = 1; // Skip the Gap reading
// Check we have the right amount of data
if (irparams.rawlen != 1 + 2 + (2 * BITS) + 1) return false ;
// Check initial Mark+Space match
if (!MATCH_MARK (results->rawbuf[offset++], HDR_MARK )) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], HDR_SPACE)) return false ;
// Read the bits in
for (int i = 0; i < BITS; i++) {
// Each bit looks like: MARK + SPACE_1 -> 1
// or : MARK + SPACE_0 -> 0
if (!MATCH_MARK(results->rawbuf[offset++], BIT_MARK)) return false ;
// IR data is big-endian, so we shuffle it in from the right:
if (MATCH_SPACE(results->rawbuf[offset], ONE_SPACE)) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Success
results->bits = BITS;
results->value = data;
results->decode_type = DENON;
return true;
}
#endif

54
IRremote/ir_Dish.cpp Normal file
View File

@ -0,0 +1,54 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// DDDD IIIII SSSS H H
// D D I S H H
// D D I SSS HHHHH
// D D I S H H
// DDDD IIIII SSSS H H
//==============================================================================
// Sharp and DISH support by Todd Treece ( http://unionbridge.org/design/ircommand )
//
// The sned function needs to be repeated 4 times
//
// Only send the last for characters of the hex.
// I.E. Use 0x1C10 instead of 0x0000000000001C10 as listed in the LIRC file.
//
// Here is the LIRC file I found that seems to match the remote codes from the
// oscilloscope:
// DISH NETWORK (echostar 301):
// http://lirc.sourceforge.net/remotes/echostar/301_501_3100_5100_58xx_59xx
#define DISH_BITS 16
#define DISH_HDR_MARK 400
#define DISH_HDR_SPACE 6100
#define DISH_BIT_MARK 400
#define DISH_ONE_SPACE 1700
#define DISH_ZERO_SPACE 2800
#define DISH_RPT_SPACE 6200
//+=============================================================================
#if SEND_DISH
void IRsend::sendDISH (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(56);
mark(DISH_HDR_MARK);
space(DISH_HDR_SPACE);
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(DISH_BIT_MARK);
space(DISH_ONE_SPACE);
} else {
mark(DISH_BIT_MARK);
space(DISH_ZERO_SPACE);
}
}
mark(DISH_HDR_MARK); //added 26th March 2016, by AnalysIR ( https://www.AnalysIR.com )
}
#endif

101
IRremote/ir_JVC.cpp Normal file
View File

@ -0,0 +1,101 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// JJJJJ V V CCCC
// J V V C
// J V V C
// J J V V C
// J V CCCC
//==============================================================================
#define JVC_BITS 16
#define JVC_HDR_MARK 8000
#define JVC_HDR_SPACE 4000
#define JVC_BIT_MARK 600
#define JVC_ONE_SPACE 1600
#define JVC_ZERO_SPACE 550
#define JVC_RPT_LENGTH 60000
//+=============================================================================
// JVC does NOT repeat by sending a separate code (like NEC does).
// The JVC protocol repeats by skipping the header.
// To send a JVC repeat signal, send the original code value
// and set 'repeat' to true
//
#if SEND_JVC
void IRsend::sendJVC (unsigned long data, int nbits, bool repeat)
{
// Set IR carrier frequency
enableIROut(38);
// Only send the Header if this is NOT a repeat command
if (!repeat){
mark(JVC_HDR_MARK);
space(JVC_HDR_SPACE);
}
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(JVC_BIT_MARK);
space(JVC_ONE_SPACE);
} else {
mark(JVC_BIT_MARK);
space(JVC_ZERO_SPACE);
}
}
// Footer
mark(JVC_BIT_MARK);
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
#if DECODE_JVC
bool IRrecv::decodeJVC (decode_results *results)
{
long data = 0;
int offset = 1; // Skip first space
// Check for repeat
if ( (irparams.rawlen - 1 == 33)
&& MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)
&& MATCH_MARK(results->rawbuf[irparams.rawlen-1], JVC_BIT_MARK)
) {
results->bits = 0;
results->value = REPEAT;
results->decode_type = JVC;
return true;
}
// Initial mark
if (!MATCH_MARK(results->rawbuf[offset++], JVC_HDR_MARK)) return false ;
if (irparams.rawlen < (2 * JVC_BITS) + 1 ) return false ;
// Initial space
if (!MATCH_SPACE(results->rawbuf[offset++], JVC_HDR_SPACE)) return false ;
for (int i = 0; i < JVC_BITS; i++) {
if (!MATCH_MARK(results->rawbuf[offset++], JVC_BIT_MARK)) return false ;
if (MATCH_SPACE(results->rawbuf[offset], JVC_ONE_SPACE)) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], JVC_ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Stop bit
if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)) return false ;
// Success
results->bits = JVC_BITS;
results->value = data;
results->decode_type = JVC;
return true;
}
#endif

80
IRremote/ir_LG.cpp Normal file
View File

@ -0,0 +1,80 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// L GGGG
// L G
// L G GG
// L G G
// LLLLL GGG
//==============================================================================
#define LG_BITS 28
#define LG_HDR_MARK 8000
#define LG_HDR_SPACE 4000
#define LG_BIT_MARK 600
#define LG_ONE_SPACE 1600
#define LG_ZERO_SPACE 550
#define LG_RPT_LENGTH 60000
//+=============================================================================
#if DECODE_LG
bool IRrecv::decodeLG (decode_results *results)
{
long data = 0;
int offset = 1; // Skip first space
// Check we have the right amount of data
if (irparams.rawlen < (2 * LG_BITS) + 1 ) return false ;
// Initial mark/space
if (!MATCH_MARK(results->rawbuf[offset++], LG_HDR_MARK)) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], LG_HDR_SPACE)) return false ;
for (int i = 0; i < LG_BITS; i++) {
if (!MATCH_MARK(results->rawbuf[offset++], LG_BIT_MARK)) return false ;
if (MATCH_SPACE(results->rawbuf[offset], LG_ONE_SPACE)) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], LG_ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Stop bit
if (!MATCH_MARK(results->rawbuf[offset], LG_BIT_MARK)) return false ;
// Success
results->bits = LG_BITS;
results->value = data;
results->decode_type = LG;
return true;
}
#endif
//+=============================================================================
#if SEND_LG
void IRsend::sendLG (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(38);
// Header
mark(LG_HDR_MARK);
space(LG_HDR_SPACE);
mark(LG_BIT_MARK);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
space(LG_ONE_SPACE);
mark(LG_BIT_MARK);
} else {
space(LG_ZERO_SPACE);
mark(LG_BIT_MARK);
}
}
space(0); // Always end with the LED off
}
#endif

46
IRremote/ir_Lego_PF.cpp Normal file
View File

@ -0,0 +1,46 @@
#include "IRremote.h"
#include "IRremoteInt.h"
#include "ir_Lego_PF_BitStreamEncoder.h"
//==============================================================================
// L EEEEEE EEEE OOOO
// L E E O O
// L EEEE E EEE O O
// L E E E O O LEGO Power Functions
// LLLLLL EEEEEE EEEE OOOO Copyright (c) 2016 Philipp Henkel
//==============================================================================
// Supported Devices
// LEGO® Power Functions IR Receiver 8884
//+=============================================================================
//
#if SEND_LEGO_PF
#if DEBUG
namespace {
void logFunctionParameters(uint16_t data, bool repeat) {
DBG_PRINT("sendLegoPowerFunctions(data=");
DBG_PRINT(data);
DBG_PRINT(", repeat=");
DBG_PRINTLN(repeat?"true)" : "false)");
}
} // anonymous namespace
#endif // DEBUG
void IRsend::sendLegoPowerFunctions(uint16_t data, bool repeat)
{
#if DEBUG
::logFunctionParameters(data, repeat);
#endif // DEBUG
enableIROut(38);
static LegoPfBitStreamEncoder bitStreamEncoder;
bitStreamEncoder.reset(data, repeat);
do {
mark(bitStreamEncoder.getMarkDuration());
space(bitStreamEncoder.getPauseDuration());
} while (bitStreamEncoder.next());
}
#endif // SEND_LEGO_PF

115
IRremote/ir_Lego_PF_BitStreamEncoder.h Normal file
View File

@ -0,0 +1,115 @@
//==============================================================================
// L EEEEEE EEEE OOOO
// L E E O O
// L EEEE E EEE O O
// L E E E O O LEGO Power Functions
// LLLLLL EEEEEE EEEE OOOO Copyright (c) 2016, 2017 Philipp Henkel
//==============================================================================
//+=============================================================================
//
class LegoPfBitStreamEncoder {
private:
uint16_t data;
bool repeatMessage;
uint8_t messageBitIdx;
uint8_t repeatCount;
uint16_t messageLength;
public:
// HIGH data bit = IR mark + high pause
// LOW data bit = IR mark + low pause
static const uint16_t LOW_BIT_DURATION = 421;
static const uint16_t HIGH_BIT_DURATION = 711;
static const uint16_t START_BIT_DURATION = 1184;
static const uint16_t STOP_BIT_DURATION = 1184;
static const uint8_t IR_MARK_DURATION = 158;
static const uint16_t HIGH_PAUSE_DURATION = HIGH_BIT_DURATION - IR_MARK_DURATION;
static const uint16_t LOW_PAUSE_DURATION = LOW_BIT_DURATION - IR_MARK_DURATION;
static const uint16_t START_PAUSE_DURATION = START_BIT_DURATION - IR_MARK_DURATION;
static const uint16_t STOP_PAUSE_DURATION = STOP_BIT_DURATION - IR_MARK_DURATION;
static const uint8_t MESSAGE_BITS = 18;
static const uint16_t MAX_MESSAGE_LENGTH = 16000;
void reset(uint16_t data, bool repeatMessage) {
this->data = data;
this->repeatMessage = repeatMessage;
messageBitIdx = 0;
repeatCount = 0;
messageLength = getMessageLength();
}
int getChannelId() const { return 1 + ((data >> 12) & 0x3); }
uint16_t getMessageLength() const {
// Sum up all marks
uint16_t length = MESSAGE_BITS * IR_MARK_DURATION;
// Sum up all pauses
length += START_PAUSE_DURATION;
for (unsigned long mask = 1UL << 15; mask; mask >>= 1) {
if (data & mask) {
length += HIGH_PAUSE_DURATION;
} else {
length += LOW_PAUSE_DURATION;
}
}
length += STOP_PAUSE_DURATION;
return length;
}
boolean next() {
messageBitIdx++;
if (messageBitIdx >= MESSAGE_BITS) {
repeatCount++;
messageBitIdx = 0;
}
if (repeatCount >= 1 && !repeatMessage) {
return false;
} else if (repeatCount >= 5) {
return false;
} else {
return true;
}
}
uint8_t getMarkDuration() const { return IR_MARK_DURATION; }
uint32_t getPauseDuration() const {
if (messageBitIdx == 0)
return START_PAUSE_DURATION;
else if (messageBitIdx < MESSAGE_BITS - 1) {
return getDataBitPause();
} else {
return getStopPause();
}
}
private:
uint16_t getDataBitPause() const {
const int pos = MESSAGE_BITS - 2 - messageBitIdx;
const bool isHigh = data & (1 << pos);
return isHigh ? HIGH_PAUSE_DURATION : LOW_PAUSE_DURATION;
}
uint32_t getStopPause() const {
if (repeatMessage) {
return getRepeatStopPause();
} else {
return STOP_PAUSE_DURATION;
}
}
uint32_t getRepeatStopPause() const {
if (repeatCount == 0 || repeatCount == 1) {
return STOP_PAUSE_DURATION + (uint32_t)5 * MAX_MESSAGE_LENGTH - messageLength;
} else if (repeatCount == 2 || repeatCount == 3) {
return STOP_PAUSE_DURATION
+ (uint32_t)(6 + 2 * getChannelId()) * MAX_MESSAGE_LENGTH - messageLength;
} else {
return STOP_PAUSE_DURATION;
}
}
};

85
IRremote/ir_Mitsubishi.cpp Normal file
View File

@ -0,0 +1,85 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// MMMMM IIIII TTTTT SSSS U U BBBB IIIII SSSS H H IIIII
// M M M I T S U U B B I S H H I
// M M M I T SSS U U BBBB I SSS HHHHH I
// M M I T S U U B B I S H H I
// M M IIIII T SSSS UUU BBBBB IIIII SSSS H H IIIII
//==============================================================================
// Looks like Sony except for timings, 48 chars of data and time/space different
#define MITSUBISHI_BITS 16
// Mitsubishi RM 75501
// 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7
// #define MITSUBISHI_HDR_MARK 250 // seen range 3500
#define MITSUBISHI_HDR_SPACE 350 // 7*50+100
#define MITSUBISHI_ONE_MARK 1950 // 41*50-100
#define MITSUBISHI_ZERO_MARK 750 // 17*50-100
// #define MITSUBISHI_DOUBLE_SPACE_USECS 800 // usually ssee 713 - not using ticks as get number wrapround
// #define MITSUBISHI_RPT_LENGTH 45000
//+=============================================================================
#if DECODE_MITSUBISHI
bool IRrecv::decodeMitsubishi (decode_results *results)
{
// Serial.print("?!? decoding Mitsubishi:");Serial.print(irparams.rawlen); Serial.print(" want "); Serial.println( 2 * MITSUBISHI_BITS + 2);
long data = 0;
if (irparams.rawlen < 2 * MITSUBISHI_BITS + 2) return false ;
int offset = 0; // Skip first space
// Initial space
#if 0
// Put this back in for debugging - note can't use #DEBUG as if Debug on we don't see the repeat cos of the delay
Serial.print("IR Gap: ");
Serial.println( results->rawbuf[offset]);
Serial.println( "test against:");
Serial.println(results->rawbuf[offset]);
#endif
#if 0
// Not seeing double keys from Mitsubishi
if (results->rawbuf[offset] < MITSUBISHI_DOUBLE_SPACE_USECS) {
// Serial.print("IR Gap found: ");
results->bits = 0;
results->value = REPEAT;
results->decode_type = MITSUBISHI;
return true;
}
#endif
offset++;
// Typical
// 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7
// Initial Space
if (!MATCH_MARK(results->rawbuf[offset], MITSUBISHI_HDR_SPACE)) return false ;
offset++;
while (offset + 1 < irparams.rawlen) {
if (MATCH_MARK(results->rawbuf[offset], MITSUBISHI_ONE_MARK)) data = (data << 1) | 1 ;
else if (MATCH_MARK(results->rawbuf[offset], MITSUBISHI_ZERO_MARK)) data <<= 1 ;
else return false ;
offset++;
if (!MATCH_SPACE(results->rawbuf[offset], MITSUBISHI_HDR_SPACE)) break ;
offset++;
}
// Success
results->bits = (offset - 1) / 2;
if (results->bits < MITSUBISHI_BITS) {
results->bits = 0;
return false;
}
results->value = data;
results->decode_type = MITSUBISHI;
return true;
}
#endif

98
IRremote/ir_NEC.cpp Normal file
View File

@ -0,0 +1,98 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// N N EEEEE CCCC
// NN N E C
// N N N EEE C
// N NN E C
// N N EEEEE CCCC
//==============================================================================
#define NEC_BITS 32
#define NEC_HDR_MARK 9000
#define NEC_HDR_SPACE 4500
#define NEC_BIT_MARK 560
#define NEC_ONE_SPACE 1690
#define NEC_ZERO_SPACE 560
#define NEC_RPT_SPACE 2250
//+=============================================================================
#if SEND_NEC
void IRsend::sendNEC (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(38);
// Header
mark(NEC_HDR_MARK);
space(NEC_HDR_SPACE);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(NEC_BIT_MARK);
space(NEC_ONE_SPACE);
} else {
mark(NEC_BIT_MARK);
space(NEC_ZERO_SPACE);
}
}
// Footer
mark(NEC_BIT_MARK);
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
// NECs have a repeat only 4 items long
//
#if DECODE_NEC
bool IRrecv::decodeNEC (decode_results *results)
{
long data = 0; // We decode in to here; Start with nothing
int offset = 1; // Index in to results; Skip first entry!?
// Check header "mark"
if (!MATCH_MARK(results->rawbuf[offset], NEC_HDR_MARK)) return false ;
offset++;
// Check for repeat
if ( (irparams.rawlen == 4)
&& MATCH_SPACE(results->rawbuf[offset ], NEC_RPT_SPACE)
&& MATCH_MARK (results->rawbuf[offset+1], NEC_BIT_MARK )
) {
results->bits = 0;
results->value = REPEAT;
results->decode_type = NEC;
return true;
}
// Check we have enough data
if (irparams.rawlen < (2 * NEC_BITS) + 4) return false ;
// Check header "space"
if (!MATCH_SPACE(results->rawbuf[offset], NEC_HDR_SPACE)) return false ;
offset++;
// Build the data
for (int i = 0; i < NEC_BITS; i++) {
// Check data "mark"
if (!MATCH_MARK(results->rawbuf[offset], NEC_BIT_MARK)) return false ;
offset++;
// Suppend this bit
if (MATCH_SPACE(results->rawbuf[offset], NEC_ONE_SPACE )) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], NEC_ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Success
results->bits = NEC_BITS;
results->value = data;
results->decode_type = NEC;
return true;
}
#endif

78
IRremote/ir_Panasonic.cpp Normal file
View File

@ -0,0 +1,78 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// PPPP AAA N N AAA SSSS OOO N N IIIII CCCC
// P P A A NN N A A S O O NN N I C
// PPPP AAAAA N N N AAAAA SSS O O N N N I C
// P A A N NN A A S O O N NN I C
// P A A N N A A SSSS OOO N N IIIII CCCC
//==============================================================================
#define PANASONIC_BITS 48
#define PANASONIC_HDR_MARK 3502
#define PANASONIC_HDR_SPACE 1750
#define PANASONIC_BIT_MARK 502
#define PANASONIC_ONE_SPACE 1244
#define PANASONIC_ZERO_SPACE 400
//+=============================================================================
#if SEND_PANASONIC
void IRsend::sendPanasonic (unsigned int address, unsigned long data)
{
// Set IR carrier frequency
enableIROut(35);
// Header
mark(PANASONIC_HDR_MARK);
space(PANASONIC_HDR_SPACE);
// Address
for (unsigned long mask = 1UL << (16 - 1); mask; mask >>= 1) {
mark(PANASONIC_BIT_MARK);
if (address & mask) space(PANASONIC_ONE_SPACE) ;
else space(PANASONIC_ZERO_SPACE) ;
}
// Data
for (unsigned long mask = 1UL << (32 - 1); mask; mask >>= 1) {
mark(PANASONIC_BIT_MARK);
if (data & mask) space(PANASONIC_ONE_SPACE) ;
else space(PANASONIC_ZERO_SPACE) ;
}
// Footer
mark(PANASONIC_BIT_MARK);
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
#if DECODE_PANASONIC
bool IRrecv::decodePanasonic (decode_results *results)
{
unsigned long long data = 0;
int offset = 1;
if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_HDR_MARK )) return false ;
if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_HDR_SPACE)) return false ;
// decode address
for (int i = 0; i < PANASONIC_BITS; i++) {
if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_BIT_MARK)) return false ;
if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ONE_SPACE )) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
results->value = (unsigned long)data;
results->address = (unsigned int)(data >> 32);
results->decode_type = PANASONIC;
results->bits = PANASONIC_BITS;
return true;
}
#endif

207
IRremote/ir_RC5_RC6.cpp Normal file
View File

@ -0,0 +1,207 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//+=============================================================================
// Gets one undecoded level at a time from the raw buffer.
// The RC5/6 decoding is easier if the data is broken into time intervals.
// E.g. if the buffer has MARK for 2 time intervals and SPACE for 1,
// successive calls to getRClevel will return MARK, MARK, SPACE.
// offset and used are updated to keep track of the current position.
// t1 is the time interval for a single bit in microseconds.
// Returns -1 for error (measured time interval is not a multiple of t1).
//
#if (DECODE_RC5 || DECODE_RC6)
int IRrecv::getRClevel (decode_results *results, int *offset, int *used, int t1)
{
int width;
int val;
int correction;
int avail;
if (*offset >= results->rawlen) return SPACE ; // After end of recorded buffer, assume SPACE.
width = results->rawbuf[*offset];
val = ((*offset) % 2) ? MARK : SPACE;
correction = (val == MARK) ? MARK_EXCESS : - MARK_EXCESS;
if (MATCH(width, ( t1) + correction)) avail = 1 ;
else if (MATCH(width, (2*t1) + correction)) avail = 2 ;
else if (MATCH(width, (3*t1) + correction)) avail = 3 ;
else return -1 ;
(*used)++;
if (*used >= avail) {
*used = 0;
(*offset)++;
}
DBG_PRINTLN( (val == MARK) ? "MARK" : "SPACE" );
return val;
}
#endif
//==============================================================================
// RRRR CCCC 55555
// R R C 5
// RRRR C 5555
// R R C 5
// R R CCCC 5555
//
// NB: First bit must be a one (start bit)
//
#define MIN_RC5_SAMPLES 11
#define RC5_T1 889
#define RC5_RPT_LENGTH 46000
//+=============================================================================
#if SEND_RC5
void IRsend::sendRC5 (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(36);
// Start
mark(RC5_T1);
space(RC5_T1);
mark(RC5_T1);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
space(RC5_T1); // 1 is space, then mark
mark(RC5_T1);
} else {
mark(RC5_T1);
space(RC5_T1);
}
}
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
#if DECODE_RC5
bool IRrecv::decodeRC5 (decode_results *results)
{
int nbits;
long data = 0;
int used = 0;
int offset = 1; // Skip gap space
if (irparams.rawlen < MIN_RC5_SAMPLES + 2) return false ;
// Get start bits
if (getRClevel(results, &offset, &used, RC5_T1) != MARK) return false ;
if (getRClevel(results, &offset, &used, RC5_T1) != SPACE) return false ;
if (getRClevel(results, &offset, &used, RC5_T1) != MARK) return false ;
for (nbits = 0; offset < irparams.rawlen; nbits++) {
int levelA = getRClevel(results, &offset, &used, RC5_T1);
int levelB = getRClevel(results, &offset, &used, RC5_T1);
if ((levelA == SPACE) && (levelB == MARK )) data = (data << 1) | 1 ;
else if ((levelA == MARK ) && (levelB == SPACE)) data = (data << 1) | 0 ;
else return false ;
}
// Success
results->bits = nbits;
results->value = data;
results->decode_type = RC5;
return true;
}
#endif
//+=============================================================================
// RRRR CCCC 6666
// R R C 6
// RRRR C 6666
// R R C 6 6
// R R CCCC 666
//
// NB : Caller needs to take care of flipping the toggle bit
//
#define MIN_RC6_SAMPLES 1
#define RC6_HDR_MARK 2666
#define RC6_HDR_SPACE 889
#define RC6_T1 444
#define RC6_RPT_LENGTH 46000
#if SEND_RC6
void IRsend::sendRC6 (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(36);
// Header
mark(RC6_HDR_MARK);
space(RC6_HDR_SPACE);
// Start bit
mark(RC6_T1);
space(RC6_T1);
// Data
for (unsigned long i = 1, mask = 1UL << (nbits - 1); mask; i++, mask >>= 1) {
// The fourth bit we send is a "double width trailer bit"
int t = (i == 4) ? (RC6_T1 * 2) : (RC6_T1) ;
if (data & mask) {
mark(t);
space(t);
} else {
space(t);
mark(t);
}
}
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
#if DECODE_RC6
bool IRrecv::decodeRC6 (decode_results *results)
{
int nbits;
long data = 0;
int used = 0;
int offset = 1; // Skip first space
if (results->rawlen < MIN_RC6_SAMPLES) return false ;
// Initial mark
if (!MATCH_MARK(results->rawbuf[offset++], RC6_HDR_MARK)) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], RC6_HDR_SPACE)) return false ;
// Get start bit (1)
if (getRClevel(results, &offset, &used, RC6_T1) != MARK) return false ;
if (getRClevel(results, &offset, &used, RC6_T1) != SPACE) return false ;
for (nbits = 0; offset < results->rawlen; nbits++) {
int levelA, levelB; // Next two levels
levelA = getRClevel(results, &offset, &used, RC6_T1);
if (nbits == 3) {
// T bit is double wide; make sure second half matches
if (levelA != getRClevel(results, &offset, &used, RC6_T1)) return false;
}
levelB = getRClevel(results, &offset, &used, RC6_T1);
if (nbits == 3) {
// T bit is double wide; make sure second half matches
if (levelB != getRClevel(results, &offset, &used, RC6_T1)) return false;
}
if ((levelA == MARK ) && (levelB == SPACE)) data = (data << 1) | 1 ; // inverted compared to RC5
else if ((levelA == SPACE) && (levelB == MARK )) data = (data << 1) | 0 ; // ...
else return false ; // Error
}
// Success
results->bits = nbits;
results->value = data;
results->decode_type = RC6;
return true;
}
#endif

92
IRremote/ir_Samsung.cpp Normal file
View File

@ -0,0 +1,92 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// SSSS AAA MMM SSSS U U N N GGGG
// S A A M M M S U U NN N G
// SSS AAAAA M M M SSS U U N N N G GG
// S A A M M S U U N NN G G
// SSSS A A M M SSSS UUU N N GGG
//==============================================================================
#define SAMSUNG_BITS 32
#define SAMSUNG_HDR_MARK 5000
#define SAMSUNG_HDR_SPACE 5000
#define SAMSUNG_BIT_MARK 560
#define SAMSUNG_ONE_SPACE 1600
#define SAMSUNG_ZERO_SPACE 560
#define SAMSUNG_RPT_SPACE 2250
//+=============================================================================
#if SEND_SAMSUNG
void IRsend::sendSAMSUNG (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(38);
// Header
mark(SAMSUNG_HDR_MARK);
space(SAMSUNG_HDR_SPACE);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(SAMSUNG_BIT_MARK);
space(SAMSUNG_ONE_SPACE);
} else {
mark(SAMSUNG_BIT_MARK);
space(SAMSUNG_ZERO_SPACE);
}
}
// Footer
mark(SAMSUNG_BIT_MARK);
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
// SAMSUNGs have a repeat only 4 items long
//
#if DECODE_SAMSUNG
bool IRrecv::decodeSAMSUNG (decode_results *results)
{
long data = 0;
int offset = 1; // Skip first space
// Initial mark
if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_HDR_MARK)) return false ;
offset++;
// Check for repeat
if ( (irparams.rawlen == 4)
&& MATCH_SPACE(results->rawbuf[offset], SAMSUNG_RPT_SPACE)
&& MATCH_MARK(results->rawbuf[offset+1], SAMSUNG_BIT_MARK)
) {
results->bits = 0;
results->value = REPEAT;
results->decode_type = SAMSUNG;
return true;
}
if (irparams.rawlen < (2 * SAMSUNG_BITS) + 4) return false ;
// Initial space
if (!MATCH_SPACE(results->rawbuf[offset++], SAMSUNG_HDR_SPACE)) return false ;
for (int i = 0; i < SAMSUNG_BITS; i++) {
if (!MATCH_MARK(results->rawbuf[offset++], SAMSUNG_BIT_MARK)) return false ;
if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ONE_SPACE)) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Success
results->bits = SAMSUNG_BITS;
results->value = data;
results->decode_type = SAMSUNG;
return true;
}
#endif

76
IRremote/ir_Sanyo.cpp Normal file
View File

@ -0,0 +1,76 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// SSSS AAA N N Y Y OOO
// S A A NN N Y Y O O
// SSS AAAAA N N N Y O O
// S A A N NN Y O O
// SSSS A A N N Y OOO
//==============================================================================
// I think this is a Sanyo decoder: Serial = SA 8650B
// Looks like Sony except for timings, 48 chars of data and time/space different
#define SANYO_BITS 12
#define SANYO_HDR_MARK 3500 // seen range 3500
#define SANYO_HDR_SPACE 950 // seen 950
#define SANYO_ONE_MARK 2400 // seen 2400
#define SANYO_ZERO_MARK 700 // seen 700
#define SANYO_DOUBLE_SPACE_USECS 800 // usually ssee 713 - not using ticks as get number wrapround
#define SANYO_RPT_LENGTH 45000
//+=============================================================================
#if DECODE_SANYO
bool IRrecv::decodeSanyo (decode_results *results)
{
long data = 0;
int offset = 0; // Skip first space <-- CHECK THIS!
if (irparams.rawlen < (2 * SANYO_BITS) + 2) return false ;
#if 0
// Put this back in for debugging - note can't use #DEBUG as if Debug on we don't see the repeat cos of the delay
Serial.print("IR Gap: ");
Serial.println( results->rawbuf[offset]);
Serial.println( "test against:");
Serial.println(results->rawbuf[offset]);
#endif
// Initial space
if (results->rawbuf[offset] < SANYO_DOUBLE_SPACE_USECS) {
//Serial.print("IR Gap found: ");
results->bits = 0;
results->value = REPEAT;
results->decode_type = SANYO;
return true;
}
offset++;
// Initial mark
if (!MATCH_MARK(results->rawbuf[offset++], SANYO_HDR_MARK)) return false ;
// Skip Second Mark
if (!MATCH_MARK(results->rawbuf[offset++], SANYO_HDR_MARK)) return false ;
while (offset + 1 < irparams.rawlen) {
if (!MATCH_SPACE(results->rawbuf[offset++], SANYO_HDR_SPACE)) break ;
if (MATCH_MARK(results->rawbuf[offset], SANYO_ONE_MARK)) data = (data << 1) | 1 ;
else if (MATCH_MARK(results->rawbuf[offset], SANYO_ZERO_MARK)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Success
results->bits = (offset - 1) / 2;
if (results->bits < 12) {
results->bits = 0;
return false;
}
results->value = data;
results->decode_type = SANYO;
return true;
}
#endif

71
IRremote/ir_Sharp.cpp Normal file
View File

@ -0,0 +1,71 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// SSSS H H AAA RRRR PPPP
// S H H A A R R P P
// SSS HHHHH AAAAA RRRR PPPP
// S H H A A R R P
// SSSS H H A A R R P
//==============================================================================
// Sharp and DISH support by Todd Treece: http://unionbridge.org/design/ircommand
//
// The send function has the necessary repeat built in because of the need to
// invert the signal.
//
// Sharp protocol documentation:
// http://www.sbprojects.com/knowledge/ir/sharp.htm
//
// Here is the LIRC file I found that seems to match the remote codes from the
// oscilloscope:
// Sharp LCD TV:
// http://lirc.sourceforge.net/remotes/sharp/GA538WJSA
#define SHARP_BITS 15
#define SHARP_BIT_MARK 245
#define SHARP_ONE_SPACE 1805
#define SHARP_ZERO_SPACE 795
#define SHARP_GAP 600000
#define SHARP_RPT_SPACE 3000
#define SHARP_TOGGLE_MASK 0x3FF
//+=============================================================================
#if SEND_SHARP
void IRsend::sendSharpRaw (unsigned long data, int nbits)
{
enableIROut(38);
// Sending codes in bursts of 3 (normal, inverted, normal) makes transmission
// much more reliable. That's the exact behaviour of CD-S6470 remote control.
for (int n = 0; n < 3; n++) {
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(SHARP_BIT_MARK);
space(SHARP_ONE_SPACE);
} else {
mark(SHARP_BIT_MARK);
space(SHARP_ZERO_SPACE);
}
}
mark(SHARP_BIT_MARK);
space(SHARP_ZERO_SPACE);
delay(40);
data = data ^ SHARP_TOGGLE_MASK;
}
}
#endif
//+=============================================================================
// Sharp send compatible with data obtained through decodeSharp()
// ^^^^^^^^^^^^^ FUNCTION MISSING!
//
#if SEND_SHARP
void IRsend::sendSharp (unsigned int address, unsigned int command)
{
sendSharpRaw((address << 10) | (command << 2) | 2, SHARP_BITS);
}
#endif

95
IRremote/ir_Sony.cpp Normal file
View File

@ -0,0 +1,95 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// SSSS OOO N N Y Y
// S O O NN N Y Y
// SSS O O N N N Y
// S O O N NN Y
// SSSS OOO N N Y
//==============================================================================
#define SONY_BITS 12
#define SONY_HDR_MARK 2400
#define SONY_HDR_SPACE 600
#define SONY_ONE_MARK 1200
#define SONY_ZERO_MARK 600
#define SONY_RPT_LENGTH 45000
#define SONY_DOUBLE_SPACE_USECS 500 // usually ssee 713 - not using ticks as get number wrapround
//+=============================================================================
#if SEND_SONY
void IRsend::sendSony (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(40);
// Header
mark(SONY_HDR_MARK);
space(SONY_HDR_SPACE);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(SONY_ONE_MARK);
space(SONY_HDR_SPACE);
} else {
mark(SONY_ZERO_MARK);
space(SONY_HDR_SPACE);
}
}
// We will have ended with LED off
}
#endif
//+=============================================================================
#if DECODE_SONY
bool IRrecv::decodeSony (decode_results *results)
{
long data = 0;
int offset = 0; // Dont skip first space, check its size
if (irparams.rawlen < (2 * SONY_BITS) + 2) return false ;
// Some Sony's deliver repeats fast after first
// unfortunately can't spot difference from of repeat from two fast clicks
if (results->rawbuf[offset] < SONY_DOUBLE_SPACE_USECS) {
// Serial.print("IR Gap found: ");
results->bits = 0;
results->value = REPEAT;
# ifdef DECODE_SANYO
results->decode_type = SANYO;
# else
results->decode_type = UNKNOWN;
# endif
return true;
}
offset++;
// Initial mark
if (!MATCH_MARK(results->rawbuf[offset++], SONY_HDR_MARK)) return false ;
while (offset + 1 < irparams.rawlen) {
if (!MATCH_SPACE(results->rawbuf[offset++], SONY_HDR_SPACE)) break ;
if (MATCH_MARK(results->rawbuf[offset], SONY_ONE_MARK)) data = (data << 1) | 1 ;
else if (MATCH_MARK(results->rawbuf[offset], SONY_ZERO_MARK)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Success
results->bits = (offset - 1) / 2;
if (results->bits < 12) {
results->bits = 0;
return false;
}
results->value = data;
results->decode_type = SONY;
return true;
}
#endif

179
IRremote/ir_Template.cpp Normal file
View File

@ -0,0 +1,179 @@
/*
Assuming the protocol we are adding is for the (imaginary) manufacturer: Shuzu
Our fantasy protocol is a standard protocol, so we can use this standard
template without too much work. Some protocols are quite unique and will require
considerably more work in this file! It is way beyond the scope of this text to
explain how to reverse engineer "unusual" IR protocols. But, unless you own an
oscilloscope, the starting point is probably to use the rawDump.ino sketch and
try to spot the pattern!
Before you start, make sure the IR library is working OK:
# Open up the Arduino IDE
# Load up the rawDump.ino example sketch
# Run it
Now we can start to add our new protocol...
1. Copy this file to : ir_Shuzu.cpp
2. Replace all occurrences of "Shuzu" with the name of your protocol.
3. Tweak the #defines to suit your protocol.
4. If you're lucky, tweaking the #defines will make the default send() function
work.
5. Again, if you're lucky, tweaking the #defines will have made the default
decode() function work.
You have written the code to support your new protocol!
Now you must do a few things to add it to the IRremote system:
1. Open IRremote.h and make the following changes:
REMEMEBER to change occurences of "SHUZU" with the name of your protocol
A. At the top, in the section "Supported Protocols", add:
#define DECODE_SHUZU 1
#define SEND_SHUZU 1
B. In the section "enumerated list of all supported formats", add:
SHUZU,
to the end of the list (notice there is a comma after the protocol name)
C. Further down in "Main class for receiving IR", add:
//......................................................................
#if DECODE_SHUZU
bool decodeShuzu (decode_results *results) ;
#endif
D. Further down in "Main class for sending IR", add:
//......................................................................
#if SEND_SHUZU
void sendShuzu (unsigned long data, int nbits) ;
#endif
E. Save your changes and close the file
2. Now open irRecv.cpp and make the following change:
A. In the function IRrecv::decode(), add:
#ifdef DECODE_NEC
DBG_PRINTLN("Attempting Shuzu decode");
if (decodeShuzu(results)) return true ;
#endif
B. Save your changes and close the file
You will probably want to add your new protocol to the example sketch
3. Open MyDocuments\Arduino\libraries\IRremote\examples\IRrecvDumpV2.ino
A. In the encoding() function, add:
case SHUZU: Serial.print("SHUZU"); break ;
Now open the Arduino IDE, load up the rawDump.ino sketch, and run it.
Hopefully it will compile and upload.
If it doesn't, you've done something wrong. Check your work.
If you can't get it to work - seek help from somewhere.
If you get this far, I will assume you have successfully added your new protocol
There is one last thing to do.
1. Delete this giant instructional comment.
2. Send a copy of your work to us so we can include it in the library and
others may benefit from your hard work and maybe even write a song about how
great you are for helping them! :)
Regards,
BlueChip
*/
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
//
//
// S H U Z U
//
//
//==============================================================================
#define BITS 32 // The number of bits in the command
#define HDR_MARK 1000 // The length of the Header:Mark
#define HDR_SPACE 2000 // The lenght of the Header:Space
#define BIT_MARK 3000 // The length of a Bit:Mark
#define ONE_SPACE 4000 // The length of a Bit:Space for 1's
#define ZERO_SPACE 5000 // The length of a Bit:Space for 0's
#define OTHER 1234 // Other things you may need to define
//+=============================================================================
//
#if SEND_SHUZU
void IRsend::sendShuzu (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(38);
// Header
mark (HDR_MARK);
space(HDR_SPACE);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark (BIT_MARK);
space(ONE_SPACE);
} else {
mark (BIT_MARK);
space(ZERO_SPACE);
}
}
// Footer
mark(BIT_MARK);
space(0); // Always end with the LED off
}
#endif
//+=============================================================================
//
#if DECODE_SHUZU
bool IRrecv::decodeShuzu (decode_results *results)
{
unsigned long data = 0; // Somewhere to build our code
int offset = 1; // Skip the Gap reading
// Check we have the right amount of data
if (irparams.rawlen != 1 + 2 + (2 * BITS) + 1) return false ;
// Check initial Mark+Space match
if (!MATCH_MARK (results->rawbuf[offset++], HDR_MARK )) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], HDR_SPACE)) return false ;
// Read the bits in
for (int i = 0; i < SHUZU_BITS; i++) {
// Each bit looks like: MARK + SPACE_1 -> 1
// or : MARK + SPACE_0 -> 0
if (!MATCH_MARK(results->rawbuf[offset++], BIT_MARK)) return false ;
// IR data is big-endian, so we shuffle it in from the right:
if (MATCH_SPACE(results->rawbuf[offset], ONE_SPACE)) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// Success
results->bits = BITS;
results->value = data;
results->decode_type = SHUZU;
return true;
}
#endif

91
IRremote/ir_Whynter.cpp Normal file
View File

@ -0,0 +1,91 @@
#include "IRremote.h"
#include "IRremoteInt.h"
//==============================================================================
// W W H H Y Y N N TTTTT EEEEE RRRRR
// W W H H Y Y NN N T E R R
// W W W HHHHH Y N N N T EEE RRRR
// W W W H H Y N NN T E R R
// WWW H H Y N N T EEEEE R R
//==============================================================================
#define WHYNTER_BITS 32
#define WHYNTER_HDR_MARK 2850
#define WHYNTER_HDR_SPACE 2850
#define WHYNTER_BIT_MARK 750
#define WHYNTER_ONE_MARK 750
#define WHYNTER_ONE_SPACE 2150
#define WHYNTER_ZERO_MARK 750
#define WHYNTER_ZERO_SPACE 750
//+=============================================================================
#if SEND_WHYNTER
void IRsend::sendWhynter (unsigned long data, int nbits)
{
// Set IR carrier frequency
enableIROut(38);
// Start
mark(WHYNTER_ZERO_MARK);
space(WHYNTER_ZERO_SPACE);
// Header
mark(WHYNTER_HDR_MARK);
space(WHYNTER_HDR_SPACE);
// Data
for (unsigned long mask = 1UL << (nbits - 1); mask; mask >>= 1) {
if (data & mask) {
mark(WHYNTER_ONE_MARK);
space(WHYNTER_ONE_SPACE);
} else {
mark(WHYNTER_ZERO_MARK);
space(WHYNTER_ZERO_SPACE);
}
}
// Footer
mark(WHYNTER_ZERO_MARK);
space(WHYNTER_ZERO_SPACE); // Always end with the LED off
}
#endif
//+=============================================================================
#if DECODE_WHYNTER
bool IRrecv::decodeWhynter (decode_results *results)
{
long data = 0;
int offset = 1; // skip initial space
// Check we have the right amount of data
if (irparams.rawlen < (2 * WHYNTER_BITS) + 6) return false ;
// Sequence begins with a bit mark and a zero space
if (!MATCH_MARK (results->rawbuf[offset++], WHYNTER_BIT_MARK )) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], WHYNTER_ZERO_SPACE)) return false ;
// header mark and space
if (!MATCH_MARK (results->rawbuf[offset++], WHYNTER_HDR_MARK )) return false ;
if (!MATCH_SPACE(results->rawbuf[offset++], WHYNTER_HDR_SPACE)) return false ;
// data bits
for (int i = 0; i < WHYNTER_BITS; i++) {
if (!MATCH_MARK(results->rawbuf[offset++], WHYNTER_BIT_MARK)) return false ;
if (MATCH_SPACE(results->rawbuf[offset], WHYNTER_ONE_SPACE )) data = (data << 1) | 1 ;
else if (MATCH_SPACE(results->rawbuf[offset], WHYNTER_ZERO_SPACE)) data = (data << 1) | 0 ;
else return false ;
offset++;
}
// trailing mark
if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK)) return false ;
// Success
results->bits = WHYNTER_BITS;
results->value = data;
results->decode_type = WHYNTER;
return true;
}
#endif

24
IRremote/library.json Normal file
View File

@ -0,0 +1,24 @@
{
"name": "IRremote",
"keywords": "infrared, ir, remote",
"description": "Send and receive infrared signals with multiple protocols",
"repository":
{
"type": "git",
"url": "https://github.com/z3t0/Arduino-IRremote.git"
},
"version": "2.3.3",
"frameworks": "arduino",
"platforms": "atmelavr",
"authors" :
[
{
"name":"Rafi Khan",
"email":"zetoslab@gmail.com"
},
{
"name":"Ken Shirriff",
"email":"ken.shirriff@gmail.com"
}
]
}

9
IRremote/library.properties Normal file
View File

@ -0,0 +1,9 @@
name=IRremote
version=2.2.3
author=shirriff
maintainer=shirriff
sentence=Send and receive infrared signals with multiple protocols
paragraph=Send and receive infrared signals with multiple protocols
category=Signal Input/Output
url=https://github.com/shirriff/Arduino-IRremote.git
architectures=*

102
IRremote/sam.cpp Normal file
View File

@ -0,0 +1,102 @@
// Support routines for SAM processor boards
#include "IRremote.h"
#include "IRremoteInt.h"
#if defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
// "Idiot check"
#ifdef USE_DEFAULT_ENABLE_IR_IN
#error Must undef USE_DEFAULT_ENABLE_IR_IN
#endif
//+=============================================================================
// ATSAMD Timer setup & IRQ functions
//
// following based on setup from GitHub jdneo/timerInterrupt.ino
static void setTimerFrequency(int frequencyHz)
{
int compareValue = (SYSCLOCK / (TIMER_PRESCALER_DIV * frequencyHz)) - 1;
//Serial.println(compareValue);
TcCount16* TC = (TcCount16*) TC3;
// Make sure the count is in a proportional position to where it was
// to prevent any jitter or disconnect when changing the compare value.
TC->COUNT.reg = map(TC->COUNT.reg, 0, TC->CC[0].reg, 0, compareValue);
TC->CC[0].reg = compareValue;
//Serial.print("COUNT.reg ");
//Serial.println(TC->COUNT.reg);
//Serial.print("CC[0].reg ");
//Serial.println(TC->CC[0].reg);
while (TC->STATUS.bit.SYNCBUSY == 1);
}
static void startTimer()
{
REG_GCLK_CLKCTRL = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID_TCC2_TC3);
while (GCLK->STATUS.bit.SYNCBUSY == 1); // wait for sync
TcCount16* TC = (TcCount16*) TC3;
TC->CTRLA.reg &= ~TC_CTRLA_ENABLE;
while (TC->STATUS.bit.SYNCBUSY == 1); // wait for sync
// Use the 16-bit timer
TC->CTRLA.reg |= TC_CTRLA_MODE_COUNT16;
while (TC->STATUS.bit.SYNCBUSY == 1); // wait for sync
// Use match mode so that the timer counter resets when the count matches the compare register
TC->CTRLA.reg |= TC_CTRLA_WAVEGEN_MFRQ;
while (TC->STATUS.bit.SYNCBUSY == 1); // wait for sync
// Set prescaler to 1024
//TC->CTRLA.reg |= TC_CTRLA_PRESCALER_DIV1024;
TC->CTRLA.reg |= TC_CTRLA_PRESCALER_DIV64;
while (TC->STATUS.bit.SYNCBUSY == 1); // wait for sync
setTimerFrequency(1000000 / USECPERTICK);
// Enable the compare interrupt
TC->INTENSET.reg = 0;
TC->INTENSET.bit.MC0 = 1;
NVIC_EnableIRQ(TC3_IRQn);
TC->CTRLA.reg |= TC_CTRLA_ENABLE;
while (TC->STATUS.bit.SYNCBUSY == 1); // wait for sync
}
//+=============================================================================
// initialization
//
void IRrecv::enableIRIn()
{
// Interrupt Service Routine - Fires every 50uS
//Serial.println("Starting timer");
startTimer();
//Serial.println("Started timer");
// Initialize state machine variables
irparams.rcvstate = STATE_IDLE;
irparams.rawlen = 0;
// Set pin modes
pinMode(irparams.recvpin, INPUT);
}
void irs(); // Defined in IRRemote as ISR(TIMER_INTR_NAME)
void TC3_Handler(void)
{
TcCount16* TC = (TcCount16*) TC3;
// If this interrupt is due to the compare register matching the timer count
// we toggle the LED.
if (TC->INTFLAG.bit.MC0 == 1) {
TC->INTFLAG.bit.MC0 = 1;
irs();
}
}
#endif // defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)

211
mecanum.ino Normal file
View File

@ -0,0 +1,211 @@
#include <boarddefs.h>
#include <IRremote.h>
#include <IRremoteInt.h>
#include <ir_Lego_PF_BitStreamEncoder.h>
#define IR 4
IRrecv irrecv(IR);
#define WHEEL_FRONT_LEFT_F A0
#define WHEEL_REAR_LEFT_R A1
#define WHEEL_REAR_RIGHT_F A2
#define WHEEL_FRONT_RIGHT_R A3
#define WHEEL_FRONT_LEFT_R 10
#define WHEEL_REAR_LEFT_F 9
#define WHEEL_FRONT_RIGHT_F 8
#define WHEEL_REAR_RIGHT_R 7
/*
* 4060792887 ^
* 4060752087 v
* 4060768407 <
* 4060784727 >
* 4060801047 enter
* 4060776567 menu
* 4060774527 aspect
* 4060745967 vol+
* 4060794927 vol-
* 4060803087 mute
* 4060750047 source
* 4060790847 video mode
* 4060786767 keystone +
* 4060778607 keystone -
* 4060782687 mouse +
* 4060766367 mouse -
* 4060748007 auto adj
* 4060743927 freeze
* 4060754127 blank
* 4060762287 zoom +
* 4060770447 zoom -
* 4060759227 info
* 4060780647 vga
* 4060742907 video
* 4060775547 s-video
*/
void setup() {
Serial.begin(115200);
irrecv.enableIRIn();
pinMode(WHEEL_REAR_RIGHT_R, OUTPUT);
pinMode(WHEEL_REAR_RIGHT_F, OUTPUT);
pinMode(WHEEL_REAR_LEFT_R, OUTPUT);
pinMode(WHEEL_REAR_LEFT_F, OUTPUT);
pinMode(WHEEL_FRONT_RIGHT_R, OUTPUT);
pinMode(WHEEL_FRONT_RIGHT_F, OUTPUT);
pinMode(WHEEL_FRONT_LEFT_R, OUTPUT);
pinMode(WHEEL_FRONT_LEFT_F, OUTPUT);
}
void stop(){
digitalWrite(WHEEL_REAR_RIGHT_R, HIGH);
digitalWrite(WHEEL_REAR_RIGHT_F, HIGH);
digitalWrite(WHEEL_REAR_LEFT_R, HIGH);
digitalWrite(WHEEL_REAR_LEFT_F, HIGH);
digitalWrite(WHEEL_FRONT_RIGHT_R, HIGH);
digitalWrite(WHEEL_FRONT_RIGHT_F, HIGH);
digitalWrite(WHEEL_FRONT_LEFT_R, HIGH);
digitalWrite(WHEEL_FRONT_LEFT_F, HIGH);
}
void forward(){
digitalWrite(WHEEL_REAR_RIGHT_F, LOW);
digitalWrite(WHEEL_REAR_LEFT_F, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_F, LOW);
digitalWrite(WHEEL_FRONT_LEFT_F, LOW);
}
void backward(){
digitalWrite(WHEEL_REAR_RIGHT_R, LOW);
digitalWrite(WHEEL_REAR_LEFT_R, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_R, LOW);
digitalWrite(WHEEL_FRONT_LEFT_R, LOW);
}
void strafe_l(){
digitalWrite(WHEEL_REAR_RIGHT_R, LOW);
digitalWrite(WHEEL_REAR_LEFT_F, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_F, LOW);
digitalWrite(WHEEL_FRONT_LEFT_R, LOW);
}
void strafe_r(){
digitalWrite(WHEEL_REAR_RIGHT_F, LOW);
digitalWrite(WHEEL_REAR_LEFT_R, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_R, LOW);
digitalWrite(WHEEL_FRONT_LEFT_F, LOW);
}
void diag_l_f(){
digitalWrite(WHEEL_REAR_LEFT_F, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_F, LOW);
}
void diag_r_r(){
digitalWrite(WHEEL_REAR_LEFT_R, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_R, LOW);
}
void diag_r_f(){
digitalWrite(WHEEL_REAR_RIGHT_F, LOW);
digitalWrite(WHEEL_FRONT_LEFT_F, LOW);
}
void diag_l_r(){
digitalWrite(WHEEL_REAR_RIGHT_R, LOW);
digitalWrite(WHEEL_FRONT_LEFT_R, LOW);
}
void turn_l(){
digitalWrite(WHEEL_REAR_RIGHT_R, LOW);
digitalWrite(WHEEL_REAR_LEFT_F, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_R, LOW);
digitalWrite(WHEEL_FRONT_LEFT_F, LOW);
}
void turn_r(){
digitalWrite(WHEEL_REAR_RIGHT_F, LOW);
digitalWrite(WHEEL_REAR_LEFT_R, LOW);
digitalWrite(WHEEL_FRONT_RIGHT_F, LOW);
digitalWrite(WHEEL_FRONT_LEFT_R, LOW);
}
unsigned long getIRremote(){
static unsigned long lastValue = 0;
decode_results irResults;
if(irrecv.decode(&irResults) == 0){
return 0;
}
if(!(irResults.decode_type == NEC && irResults.value == REPEAT)){
lastValue = irResults.value;
}
irrecv.resume();
return lastValue;
}
void loop() {
unsigned long remote = getIRremote();
static unsigned long modus;
if(remote){
Serial.println(remote);
modus = remote;
}
if(modus == 4060792887){
forward();
}else if(modus == 4060801047){
stop();
}else if(modus == 4060752087){
backward();
}else if(modus == 4060768407){
strafe_l();
}else if(modus == 4060784727){
strafe_r();
}else if(modus == 4060750047){
turn_l();
}else if(modus == 4060790847){
turn_r();
}else if(modus == 4060786767){
diag_l_f();
}else if(modus == 4060778607){
diag_r_r();
}else if(modus == 4060782687){
diag_r_f();
}else if(modus == 4060766367){
diag_l_r();
}
/*
stop();
forward();
delay(1000);
stop();
backward();
delay(1000);
stop();
strafe_l();
delay(1000);
stop();
strafe_r();
delay(1000);
stop();
diag_l_f();
delay(1000);
stop();
diag_l_r();
delay(1000);
stop();
diag_r_f();
delay(1000);
stop();
diag_r_r();
delay(1000);
stop();
turn_l();
delay(1000);
stop();
turn_r();
delay(1000);
stop();
*/
}